Komatsu ring 427-30-12420 ring | Mass (without HJ ring):1.41 kg; E:104.5 mm; Min operating temperature, Tmin:-40 °C; Dynamic load, C:111 kN; D:120 mm; Brand:NTN; d:55 mm; da min:64 mm; Db min:106 mm; Da max:111 mm; |
Komatsu ring 175-63-14161 ring | Lockwasher and Lockplates:W-30; S:1.125 in; Sleeve:S-130 x 5 1/4; Taper:1:12; D1:7.693 in; Tolerance1:-0.005 in; SNW/SNP Assembly Weight:14.6 lb; Locknut:AN-30; Bearing Number:22330K, 23230K; Diameter d :5 1/4 in; |
Komatsu ring 708-27-12750 ring | Housing Material:304 Stainless Steel; Width T(mm):35; Flange O.D. H(φ):59; Holder Surface Treatment:Not Provided; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Volume Discount:Available; Bearing I.D. d(mm):15; Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; |
Komatsu ring 20Y-30-16162 ring | A:48 mm; Designation of bearing:UC206-19G2; E:18 mm; H:42.9 mm; T max.:100 °C; Designation of housing:PG206-; N:M10; s1:19.05 mm; C0:11.2 kN; Weight:1.11 kg; |
Komatsu ring YM729402-22900 ring | C:35.1 kN; Designation of housing:FLZ210-; A4:37 mm; Recommended tightening torque for set screw:16.8 Nm; T min.:-20 °C; H3:105; A:41 mm; A2:56.6 mm; T max.:200 °C; L:116 mm; |
Komatsu ring 566-88-71510 ring | C:35.1 kN; Designation of housing:FLZ210-; A4:37 mm; Recommended tightening torque for set screw:16.8 Nm; T min.:-20 °C; H3:105; A:41 mm; A2:56.6 mm; T max.:200 °C; L:116 mm; |
Komatsu ring 198-22-23140 ring | Mass (without HJ ring):1.41 kg; E:104.5 mm; Min operating temperature, Tmin:-40 °C; Dynamic load, C:111 kN; D:120 mm; Brand:NTN; d:55 mm; da min:64 mm; Db min:106 mm; Da max:111 mm; |
Komatsu ring 175-916-4210 ring | Mass (without HJ ring):1.41 kg; E:104.5 mm; Min operating temperature, Tmin:-40 °C; Dynamic load, C:111 kN; D:120 mm; Brand:NTN; d:55 mm; da min:64 mm; Db min:106 mm; Da max:111 mm; |