Komatsu ring 103-15-22620 ring	Lockwasher and Lockplates:W-30; S:1.125 in; Sleeve:S-130 x 5 1/4; Taper:1:12; D1:7.693 in; Tolerance1:-0.005 in; SNW/SNP Assembly Weight:14.6 lb; Locknut:AN-30; Bearing Number:22330K, 23230K; Diameter d :5 1/4 in;
Komatsu ring 113-15-22390 ring	Shaft Size  :2-11/16 in; Eng Internal Radial Clearance - Min:0.0037; Y1 - Geometry Factor:2.90; Oil Lubrication - T Seal:2400 rpm; Grease Lubrication - M/N Seal:1400 rpm; Oil Lubrication - M/N Seal:1400 rpm; Eng Internal Radial Clearance - Max:0.0047; e - Geometry Factor:0.23; Grease Lubrication - T Seal:2000 rpm; Engineering Group:Mounted Bearing;
Komatsu ring 707-71-11150 ring	C:35.1 kN; Designation of housing:FLZ210-; A4:37 mm; Recommended tightening torque for set screw:16.8 Nm; T min.:-20 °C; H3:105; A:41 mm; A2:56.6 mm; T max.:200 °C; L:116 mm;
Komatsu ring 20Y-30-16162 ring	Seal Type:Narrow Shroud; Inside Ring Outside Diameter:1.579 in; Bearing Type:Ball Bearing; Total Length H:141.3 mm; Housing Width A:0.843 in; Center of Bearing from Bearing End S:11.1 mm; Inside Ring Width B:32.5 mm; Shaft Size d:1 1/8 in; Dynamic Load Rating:4850 lbf; Housing Style:Two-Bolt Flange;
Komatsu ring 796-467-1620 ring	C:35.1 kN; Designation of housing:FLZ210-; A4:37 mm; Recommended tightening torque for set screw:16.8 Nm; T min.:-20 °C; H3:105; A:41 mm; A2:56.6 mm; T max.:200 °C; L:116 mm;
Komatsu ring 41E-33-00020 ring	R - Cone Backface To Clear Radius1:0.03 in; B - Cone Width:0.8640 in; D:3.9370 in; Design Units:Imperial; Cup Part Number:384XD; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:6280 lbf; Series:385; r - Cup Frontface To Clear Radius2:0.03 in; K - Factor7:1.65; C - Double Cup Width:3.7640 in;
Komatsu ring 707-71-32790 ring	Pillow/Plummer Block Style:Split Cylindrical Ho; Shaft Size:55 mm; Dimension J:10.6 in; Seal Type:Aluminium Triple Lab; Dimension L:13.0 in; Support Type:Two-Bolt Plummer Blo; Weight:47 lb; Dimension H1:1.5 in; Bolt Size:2 x M20; Cor - Static Load Rating:42714 lbf;
Komatsu ring 562-15-22630 ring	Lockwasher and Lockplates:W-30; S:1.125 in; Sleeve:S-130 x 5 1/4; Taper:1:12; D1:7.693 in; Tolerance1:-0.005 in; SNW/SNP Assembly Weight:14.6 lb; Locknut:AN-30; Bearing Number:22330K, 23230K; Diameter d :5 1/4 in;