Komatsu ring 6215-11-4420 ring	G:1/4-28UNF; SW:3.18 mm; B1:44.3 mm; D:52 mm; S:17.4 mm; d1:37.4 mm; m:5 mm; Weight:0.24 kg; T max.:200 °C; d:25.4 mm;
Komatsu ring 20E-60-K2090 ring	H2:102 mm; G:M6x1; Weight:3.87 kg; C:43.55 kN; L3:95 mm; T max.:100 °C; Designation of housing:T211N-; H1:130 mm; s1:27.8 mm; A2:38 mm;
Komatsu ring 562-22-31970 ring	Y1 - ISO Factor5:2.82; C1(2) - Dynamic Radial Rating (Two-Rows):15700000 N; D:1090.000 mm; Da - Outer Ring Backing Diameter:996.000 mm; Cage Type:YMD; B - Inner Ring Width:412 mm; R - Inner Ring To Clear Radius1:6.000 mm; B - Outer Ring Width:412.000 mm; Bore Taper:1/30; UPC Code:087796141896;
Komatsu ring 23S-15-42630 ring	R - Cone Backface To Clear Radius1:0.03 in; B - Cone Width:0.8640 in; D:3.9370 in; Design Units:Imperial; Cup Part Number:384XD; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:6280 lbf; Series:385; r - Cup Frontface To Clear Radius2:0.03 in; K - Factor7:1.65; C - Double Cup Width:3.7640 in;
Komatsu ring 124-15-42610 ring	G:1/4-28UNF; SW:3.18 mm; B1:44.3 mm; D:52 mm; S:17.4 mm; d1:37.4 mm; m:5 mm; Weight:0.24 kg; T max.:200 °C; d:25.4 mm;
Komatsu ring 562-15-22630 ring	C:35.1 kN; Designation of housing:FLZ210-; A4:37 mm; Recommended tightening torque for set screw:16.8 Nm; T min.:-20 °C; H3:105; A:41 mm; A2:56.6 mm; T max.:200 °C; L:116 mm;
Komatsu ring 568-22-19630 ring	Y1 - ISO Factor5:2.82; C1(2) - Dynamic Radial Rating (Two-Rows):15700000 N; D:1090.000 mm; Da - Outer Ring Backing Diameter:996.000 mm; Cage Type:YMD; B - Inner Ring Width:412 mm; R - Inner Ring To Clear Radius1:6.000 mm; B - Outer Ring Width:412.000 mm; Bore Taper:1/30; UPC Code:087796141896;
Komatsu ring 198-15-22150 ring	Mass (without HJ ring):1.41 kg; E:104.5 mm; Min operating temperature, Tmin:-40 °C; Dynamic load, C:111 kN; D:120 mm; Brand:NTN; d:55 mm; da min:64 mm; Db min:106 mm; Da max:111 mm;