Komatsu ring 22J-25-11101 ring	R - Cone Backface To Clear Radius1:0.03 in; B - Cone Width:0.8640 in; D:3.9370 in; Design Units:Imperial; Cup Part Number:384XD; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:6280 lbf; Series:385; r - Cup Frontface To Clear Radius2:0.03 in; K - Factor7:1.65; C - Double Cup Width:3.7640 in;
Komatsu ring 23S-15-42630 ring	R - Cone Backface To Clear Radius1:0.03 in; B - Cone Width:0.8640 in; D:3.9370 in; Design Units:Imperial; Cup Part Number:384XD; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:6280 lbf; Series:385; r - Cup Frontface To Clear Radius2:0.03 in; K - Factor7:1.65; C - Double Cup Width:3.7640 in;
Komatsu ring 707-71-31560 ring	Lockwasher and Lockplates:W-30; S:1.125 in; Sleeve:S-130 x 5 1/4; Taper:1:12; D1:7.693 in; Tolerance1:-0.005 in; SNW/SNP Assembly Weight:14.6 lb; Locknut:AN-30; Bearing Number:22330K, 23230K; Diameter d :5 1/4 in;
Komatsu ring 3EH-27-11230KF ring	H2:102 mm; G:M6x1; Weight:3.87 kg; C:43.55 kN; L3:95 mm; T max.:100 °C; Designation of housing:T211N-; H1:130 mm; s1:27.8 mm; A2:38 mm;
Komatsu ring 198-54-13761 ring	Lockwasher and Lockplates:W-30; S:1.125 in; Sleeve:S-130 x 5 1/4; Taper:1:12; D1:7.693 in; Tolerance1:-0.005 in; SNW/SNP Assembly Weight:14.6 lb; Locknut:AN-30; Bearing Number:22330K, 23230K; Diameter d :5 1/4 in;
Komatsu ring 6623-31-1371 ring	G:1/4-28UNF; SW:3.18 mm; B1:44.3 mm; D:52 mm; S:17.4 mm; d1:37.4 mm; m:5 mm; Weight:0.24 kg; T max.:200 °C; d:25.4 mm;
Komatsu ring 796-667-1220 ring	C90 - Dynamic Radial Rating (90 million revolutions)4:68100 lbf; r - Cup Backface To Clear Radius2:3.30 mm; R - Cone Backface To Clear Radius1:9.650 mm; C - Cup Width:63.500 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:46800 lbf; G2 - Heat Generation Factor (Rib-Roller End):128.2; d:165.1 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:263000 lbf; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):1150.5;
Komatsu ring 206-63-K1660 ring	Shaft Size  :2-11/16 in; Eng Internal Radial Clearance - Min:0.0037; Y1 - Geometry Factor:2.90; Oil Lubrication - T Seal:2400 rpm; Grease Lubrication - M/N Seal:1400 rpm; Oil Lubrication - M/N Seal:1400 rpm; Eng Internal Radial Clearance - Max:0.0047; e - Geometry Factor:0.23; Grease Lubrication - T Seal:2000 rpm; Engineering Group:Mounted Bearing;