Komatsu ring 561-15-42280 ring	Seal Type:Narrow Shroud; Inside Ring Outside Diameter:1.579 in; Bearing Type:Ball Bearing; Total Length H:141.3 mm; Housing Width A:0.843 in; Center of Bearing from Bearing End S:11.1 mm; Inside Ring Width B:32.5 mm; Shaft Size d:1 1/8 in; Dynamic Load Rating:4850 lbf; Housing Style:Two-Bolt Flange;
Komatsu ring 135-15-22651 ring	Mass (without HJ ring):1.41 kg; E:104.5 mm; Min operating temperature, Tmin:-40 °C; Dynamic load, C:111 kN; D:120 mm; Brand:NTN; d:55 mm; da min:64 mm; Db min:106 mm; Da max:111 mm;
Komatsu ring 17A-15-22650 ring	Lockwasher and Lockplates:W-30; S:1.125 in; Sleeve:S-130 x 5 1/4; Taper:1:12; D1:7.693 in; Tolerance1:-0.005 in; SNW/SNP Assembly Weight:14.6 lb; Locknut:AN-30; Bearing Number:22330K, 23230K; Diameter d :5 1/4 in;
Komatsu ring 363-844-3130 ring	Bearing Weight:5.1 Kg; B:58.000 mm; a - Effective Center Location3:-17.3 mm; Cone Part Number:X32315M; G1 - Heat Generation Factor (Roller-Raceway):145.2; K - Factor7:1.69; G2 - Heat Generation Factor (Rib-Roller End):26.7; C1 - Dynamic Radial Rating (1 million revolutions)5:357000 N; Cup Part Number:Y32315M; Ab - Cage-Cone Frontface Clearance:1.5 mm;
Komatsu ring 198-27-45240 ring	Mass (without HJ ring):1.41 kg; E:104.5 mm; Min operating temperature, Tmin:-40 °C; Dynamic load, C:111 kN; D:120 mm; Brand:NTN; d:55 mm; da min:64 mm; Db min:106 mm; Da max:111 mm;
Komatsu ring 562-15-22630 ring	C:35.1 kN; Designation of housing:FLZ210-; A4:37 mm; Recommended tightening torque for set screw:16.8 Nm; T min.:-20 °C; H3:105; A:41 mm; A2:56.6 mm; T max.:200 °C; L:116 mm;
Komatsu ring 8233-72-3520 ring	H2:102 mm; G:M6x1; Weight:3.87 kg; C:43.55 kN; L3:95 mm; T max.:100 °C; Designation of housing:T211N-; H1:130 mm; s1:27.8 mm; A2:38 mm;
Komatsu ring 198-30-34340 ring	A:48 mm; Designation of bearing:UC206-19G2; E:18 mm; H:42.9 mm; T max.:100 °C; Designation of housing:PG206-; N:M10; s1:19.05 mm; C0:11.2 kN; Weight:1.11 kg;