Komatsu ring 796-667-1310 ring	Machining:No; Stroke:No; RoHS:6; Days to Ship:8 Days; Seal:Silicone; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Surface Treatment:No; Pillow Type, Category:Standard;
Komatsu ring 791-615-1111 ring	R - Cone Backface To Clear Radius1:0.03 in; B - Cone Width:0.8640 in; D:3.9370 in; Design Units:Imperial; Cup Part Number:384XD; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:6280 lbf; Series:385; r - Cup Frontface To Clear Radius2:0.03 in; K - Factor7:1.65; C - Double Cup Width:3.7640 in;
Komatsu ring 426-30-12151 ring	Lockwasher and Lockplates:W-30; S:1.125 in; Sleeve:S-130 x 5 1/4; Taper:1:12; D1:7.693 in; Tolerance1:-0.005 in; SNW/SNP Assembly Weight:14.6 lb; Locknut:AN-30; Bearing Number:22330K, 23230K; Diameter d :5 1/4 in;
Komatsu ring 131-30-36141 ring	G:1/4-28UNF; SW:3.18 mm; B1:44.3 mm; D:52 mm; S:17.4 mm; d1:37.4 mm; m:5 mm; Weight:0.24 kg; T max.:200 °C; d:25.4 mm;
Komatsu ring 426-Z82-0510 ring	Bearing Weight:5.1 Kg; B:58.000 mm; a - Effective Center Location3:-17.3 mm; Cone Part Number:X32315M; G1 - Heat Generation Factor (Roller-Raceway):145.2; K - Factor7:1.69; G2 - Heat Generation Factor (Rib-Roller End):26.7; C1 - Dynamic Radial Rating (1 million revolutions)5:357000 N; Cup Part Number:Y32315M; Ab - Cage-Cone Frontface Clearance:1.5 mm;
Komatsu ring 566-81-14111CL ring	Mass (without HJ ring):1.41 kg; E:104.5 mm; Min operating temperature, Tmin:-40 °C; Dynamic load, C:111 kN; D:120 mm; Brand:NTN; d:55 mm; da min:64 mm; Db min:106 mm; Da max:111 mm;
Komatsu ring 423-15-12662 ring	G:1/4-28UNF; SW:3.18 mm; B1:44.3 mm; D:52 mm; S:17.4 mm; d1:37.4 mm; m:5 mm; Weight:0.24 kg; T max.:200 °C; d:25.4 mm;
Komatsu ring 791-827-1140 ring	H2:102 mm; G:M6x1; Weight:3.87 kg; C:43.55 kN; L3:95 mm; T max.:100 °C; Designation of housing:T211N-; H1:130 mm; s1:27.8 mm; A2:38 mm;