Komatsu ring 195-30-16144E ring	Shaft Size  :2-11/16 in; Eng Internal Radial Clearance - Min:0.0037; Y1 - Geometry Factor:2.90; Oil Lubrication - T Seal:2400 rpm; Grease Lubrication - M/N Seal:1400 rpm; Oil Lubrication - M/N Seal:1400 rpm; Eng Internal Radial Clearance - Max:0.0047; e - Geometry Factor:0.23; Grease Lubrication - T Seal:2000 rpm; Engineering Group:Mounted Bearing;
Komatsu ring 198-15-22610 ring	Housing Material:304 Stainless Steel; Width T(mm):35; Flange O.D. H(φ):59; Holder Surface Treatment:Not Provided; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Volume Discount:Available; Bearing I.D. d(mm):15; Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel;
Komatsu ring LI11471 ring	C:35.1 kN; Designation of housing:FLZ210-; A4:37 mm; Recommended tightening torque for set screw:16.8 Nm; T min.:-20 °C; H3:105; A:41 mm; A2:56.6 mm; T max.:200 °C; L:116 mm;
Komatsu ring 707-71-11850 ring	Seal Type:Narrow Shroud; Inside Ring Outside Diameter:1.579 in; Bearing Type:Ball Bearing; Total Length H:141.3 mm; Housing Width A:0.843 in; Center of Bearing from Bearing End S:11.1 mm; Inside Ring Width B:32.5 mm; Shaft Size d:1 1/8 in; Dynamic Load Rating:4850 lbf; Housing Style:Two-Bolt Flange;
Komatsu ring 103-15-22620 ring	Lockwasher and Lockplates:W-30; S:1.125 in; Sleeve:S-130 x 5 1/4; Taper:1:12; D1:7.693 in; Tolerance1:-0.005 in; SNW/SNP Assembly Weight:14.6 lb; Locknut:AN-30; Bearing Number:22330K, 23230K; Diameter d :5 1/4 in;
Komatsu ring 427-15-13361 ring	Mass (without HJ ring):1.41 kg; E:104.5 mm; Min operating temperature, Tmin:-40 °C; Dynamic load, C:111 kN; D:120 mm; Brand:NTN; d:55 mm; da min:64 mm; Db min:106 mm; Da max:111 mm;
Komatsu ring 232-22-52760 ring	Mass (without HJ ring):1.41 kg; E:104.5 mm; Min operating temperature, Tmin:-40 °C; Dynamic load, C:111 kN; D:120 mm; Brand:NTN; d:55 mm; da min:64 mm; Db min:106 mm; Da max:111 mm;
Komatsu ring 561-15-42280 ring	Y1 - ISO Factor5:2.82; C1(2) - Dynamic Radial Rating (Two-Rows):15700000 N; D:1090.000 mm; Da - Outer Ring Backing Diameter:996.000 mm; Cage Type:YMD; B - Inner Ring Width:412 mm; R - Inner Ring To Clear Radius1:6.000 mm; B - Outer Ring Width:412.000 mm; Bore Taper:1/30; UPC Code:087796141896;