Komatsu ring 21T-60-12730 ring	Mass (without HJ ring):1.41 kg; E:104.5 mm; Min operating temperature, Tmin:-40 °C; Dynamic load, C:111 kN; D:120 mm; Brand:NTN; d:55 mm; da min:64 mm; Db min:106 mm; Da max:111 mm;
Komatsu ring 130-70-12170 ring	G:1/4-28UNF; SW:3.18 mm; B1:44.3 mm; D:52 mm; S:17.4 mm; d1:37.4 mm; m:5 mm; Weight:0.24 kg; T max.:200 °C; d:25.4 mm;
Komatsu ring 104-15-22650 ring	C:35.1 kN; Designation of housing:FLZ210-; A4:37 mm; Recommended tightening torque for set screw:16.8 Nm; T min.:-20 °C; H3:105; A:41 mm; A2:56.6 mm; T max.:200 °C; L:116 mm;
Komatsu ring 235-30-00220 ring	Y1 - ISO Factor5:2.82; C1(2) - Dynamic Radial Rating (Two-Rows):15700000 N; D:1090.000 mm; Da - Outer Ring Backing Diameter:996.000 mm; Cage Type:YMD; B - Inner Ring Width:412 mm; R - Inner Ring To Clear Radius1:6.000 mm; B - Outer Ring Width:412.000 mm; Bore Taper:1/30; UPC Code:087796141896;
Komatsu ring 198-30-62320 ring	Lockwasher and Lockplates:W-30; S:1.125 in; Sleeve:S-130 x 5 1/4; Taper:1:12; D1:7.693 in; Tolerance1:-0.005 in; SNW/SNP Assembly Weight:14.6 lb; Locknut:AN-30; Bearing Number:22330K, 23230K; Diameter d :5 1/4 in;
Komatsu ring 125-30-33261 ring	Machining:No; Stroke:No; RoHS:6; Days to Ship:8 Days; Seal:Silicone; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Surface Treatment:No; Pillow Type, Category:Standard;
Komatsu ring 568-50-12180 ring	Shaft Size  :2-11/16 in; Eng Internal Radial Clearance - Min:0.0037; Y1 - Geometry Factor:2.90; Oil Lubrication - T Seal:2400 rpm; Grease Lubrication - M/N Seal:1400 rpm; Oil Lubrication - M/N Seal:1400 rpm; Eng Internal Radial Clearance - Max:0.0047; e - Geometry Factor:0.23; Grease Lubrication - T Seal:2000 rpm; Engineering Group:Mounted Bearing;
Komatsu ring 234-30-13420 ring	C90 - Dynamic Radial Rating (90 million revolutions)4:68100 lbf; r - Cup Backface To Clear Radius2:3.30 mm; R - Cone Backface To Clear Radius1:9.650 mm; C - Cup Width:63.500 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:46800 lbf; G2 - Heat Generation Factor (Rib-Roller End):128.2; d:165.1 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:263000 lbf; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):1150.5;