Komatsu bracket assembly 419-S99-2330 bracket	d:25 mm; S:14.3 mm; N1:16 mm; C0:7.88 kN; G:M6x1; Designation of housing:T205N-; A5:19.7 mm; C:14 kN; L:97 mm; B:34 mm;
Komatsu bracket assembly 207-01-71211 bracket	Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Volume Discount:Available; Bearing Material:[Steel] Steel; Width T(mm):35; Housing Material:[Aluminum Alloy] 201; Holder Surface Treatment:Clear Anodize; Flange Shape:Compact Type;
Komatsu bracket assembly "203-63-K1320 Tube assembly	Designation of bearing:UC207-22G2L4; Z:59.9 mm; C:25.7 kN; T min.:-20 °C; Designation of open end cover:SCOU207-22; H:47.6 mm; H1:20 mm; Designation of housing:PG207N-; Recommended tightening torque for set screw:8 Nm; C0:15.2 kN;
Komatsu bracket assembly "196-03-00041 Tube assembly	Dz:95 mm; Z:58.4 mm; B:49.2 mm; Designation of housing:FE209N-; Designation of bearing:UC209-27G2T20; C:31.85 kN; A1:13 mm; A:40 mm; N:14mm; S:19 mm;
Komatsu bracket assembly 6162-14-4790 bracket	rs min:3 mm; ra max:2.5 mm; Characteristic inner ring frequency, BPFI:7.07 Hz; Min operating temperature, Tmin:-40 °C; Contact angle α:40 °; db min:107 mm; Max operating temperature, Tmax:120 °C; r1a max:1 mm; Mass:8.32 kg; Characteristic outer ring frequency, BPF0:4.93 Hz;
Komatsu bracket assembly 198-54-45450Pillar	Designation of bearing:UC207-22G2L4; Z:59.9 mm; C:25.7 kN; T min.:-20 °C; Designation of open end cover:SCOU207-22; H:47.6 mm; H1:20 mm; Designation of housing:PG207N-; Recommended tightening torque for set screw:8 Nm; C0:15.2 kN;
Komatsu bracket assembly 175-65-33640 bracket	Min operating temperature, Tmin:-40 °C; Y0:1.92; Radial clearance class:C3; Static load, C0:1,070 kN; Characteristic rolling element frequency, BSF:8.04 Hz; da min:141 mm; k:4.5 mm; Nlim:2,400 rpm; D1:183.2 mm; b:10.32 mm;
Komatsu bracket assembly 20Y-62-K3380 bracket	Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Volume Discount:Available; Bearing Material:[Steel] Steel; Width T(mm):35; Housing Material:[Aluminum Alloy] 201; Holder Surface Treatment:Clear Anodize; Flange Shape:Compact Type;