Komatsu Base line, base "	Designation of bearing:UC215-48G2L3; A:59 mm; Recommended tightening torque for set screw:27.1 Nm; N:23mm; A2:85.8 mm; d:76.2 mm; T min.:-20 °C; e:41.3 mm; B:77.8 mm; J:153 mm;
Komatsu Base line, base "	Note:This product line wa; Cor - Static Load Rating:529875 lbf; Dimension T:30.0 in; Dimension H:6.3 in; Dimension V:0.2 in; Maximum Speed:670 rpm; Bolt Size:8 x M30; Dimension N:23.750 in; Dimension L:11.5 in; Dimension P:1.5 in;
Komatsu Base line, base "	Designation of closed end cover:SCCE204; Z:46.2 mm; S:17 mm; Weight:0.83 kg; A4:20.5 mm; B:34 mm; J:78 mm; Dz:54 mm; N:12mm; Designation of housing:FC204N-;
Komatsu Base line, base "	N:19mm; L:97 mm; s1:17 mm; Recommended tightening torque for set screw:3.7 Nm; A2:24 mm; Designation of bearing:UC205-14G2L3; S:14.3 mm; Weight:0.84 kg; L3:51 mm; Dz:60 mm;
Komatsu Base line, base "6505-51-7840 Mandrel assembly	B:46.038 mm; R - Cone Backface To Clear Radius1:3.300 mm; K - Factor7:1.27; Db - Cup Backface Backing Diameter:642.11 mm; C0 - Static Radial Rating:431000 lbf; Bearing Weight:21.500 Kg; Da - Cup Frontface Backing Diameter:662.69 mm; Cg - Geometry Factor:0.239; Series:LL777100; C90 - Dynamic Radial Rating (90 million revolutions)4:39700 lbf;
Komatsu Base line, base "	da min:53 mm; Minimum Buy Quantity:N/A; Characteristic inner ring frequency, BPFI:4.94 Hz; Characteristic cage frequency, FTF:0.38 Hz; Nlim (grease):4,700 rpm; ra max:1.5 mm; rs min:1.5 mm; Min operating temperature, Tmin:-25 °C; Characteristic outer ring frequency, BPF0:3.06 Hz; f0:13.1;
Komatsu Base line, base "	A1:13 mm; Designation of housing:F206-; d:30 mm; Designation of bearing:US206G2T20; e:18 mm; T min.:-20 °C; A:31 mm; C:19.5 kN; S:8 mm; L:108 mm;
Komatsu Base line, base "ND116420-2780 Mandrel assembly	A1:13 mm; Designation of housing:F206-; d:30 mm; Designation of bearing:US206G2T20; e:18 mm; T min.:-20 °C; A:31 mm; C:19.5 kN; S:8 mm; L:108 mm;