Komatsu Base line, base "	S:7 mm; C:12.8 kN; L3:51 mm; L2:10 mm; H2:51 mm; H1:76 mm; N2:32 mm; Designation of housing:T204N-; N1:16 mm; L:94 mm;
Komatsu Base line, base "	B:46.038 mm; R - Cone Backface To Clear Radius1:3.300 mm; K - Factor7:1.27; Db - Cup Backface Backing Diameter:642.11 mm; C0 - Static Radial Rating:431000 lbf; Bearing Weight:21.500 Kg; Da - Cup Frontface Backing Diameter:662.69 mm; Cg - Geometry Factor:0.239; Series:LL777100; C90 - Dynamic Radial Rating (90 million revolutions)4:39700 lbf;
Komatsu Base line, base "6505-51-6880 Mandrel assembly	Designation of closed end cover:SCCE204; Z:46.2 mm; S:17 mm; Weight:0.83 kg; A4:20.5 mm; B:34 mm; J:78 mm; Dz:54 mm; N:12mm; Designation of housing:FC204N-;
Komatsu Base line, base "6505-51-5850 Mandrel assembly	Bearing Part Number:6008; Bearing Used:Deep Groove Ball Bea; Width T(mm):70; Shape:Flange Type; Bearing Retained:No; Type:Bearings with Housin; RoHS:6; Days to Ship:8 Days; Holder Surface Treatment:Black Oxide Coating;
Komatsu Base line, base "113-60-23151 Base line, base	S:7 mm; C:12.8 kN; L3:51 mm; L2:10 mm; H2:51 mm; H1:76 mm; N2:32 mm; Designation of housing:T204N-; N1:16 mm; L:94 mm;
Komatsu Base line, base "	Outer Ring Type:Flat; d:35; Rolling Element Material:Steel; Contact angle(Degree):More than 24°, 32°; B:22.75; Inner/Outer Ring Material:Steel; Load Direction:Radial; Specifications/Environment:Standard;
Komatsu Base line, base "	N:19mm; L:97 mm; s1:17 mm; Recommended tightening torque for set screw:3.7 Nm; A2:24 mm; Designation of bearing:UC205-14G2L3; S:14.3 mm; Weight:0.84 kg; L3:51 mm; Dz:60 mm;
Komatsu Base line, base "	da min:53 mm; Minimum Buy Quantity:N/A; Characteristic inner ring frequency, BPFI:4.94 Hz; Characteristic cage frequency, FTF:0.38 Hz; Nlim (grease):4,700 rpm; ra max:1.5 mm; rs min:1.5 mm; Min operating temperature, Tmin:-25 °C; Characteristic outer ring frequency, BPF0:3.06 Hz; f0:13.1;