Komatsu Flange 234-30-22710 Flange	C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:10000 lbf; d:2 in; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:0.11 in; e - ISO Factor8:0.4; B - Cone Width:0.8660 in; db - Cone Backface Backing Diameter:2.44 in; Y2 - ISO Factor10:2.5; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:5760 lbf; Bearing Weight:4.94 lb;
Komatsu Flange 235-30-11800 Flange	T min.:-40 °C; Z:15.3 mm; N:11mm; s1:15.5 mm; C0:6.65 kN; H1:14.5 mm; d:19.05 mm; Recommended tightening torque for set screw:3.7 Nm; L:130 mm; H:33.3 mm;
Komatsu Flange 234-30-22300 Flange	Holder Surface Treatment:Electroless Nickel P; Seals:DD (Contact Rubber S; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Days to Ship:8 Days; T(mm):35 ～ 50; Height H(mm):40 ～ 60; Bearing Retained:No; Bearing I.D. d(mm):20; Number of Bearings:Double;
Komatsu Flange 234-30-22710 Flange	Ca90 - Dynamic Thrust Rating (90 million revolutions)6:30800 lbf; da - Cone Frontface Backing Diameter:195.07 mm; Cg - Geometry Factor:0.129; C - Cup Width:47.625 mm; B:63.5 mm; d:177.800 mm; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):692.3; C0 - Static Radial Rating:242000 lbf; K - Factor7:1.25;
Komatsu Flange 421-W30-1101 Flange	Holder Surface Treatment:Electroless Nickel P; Seals:DD (Contact Rubber S; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Days to Ship:8 Days; T(mm):35 ～ 50; Height H(mm):40 ～ 60; Bearing Retained:No; Bearing I.D. d(mm):20; Number of Bearings:Double;
Komatsu Flange 566-81-61100 Flange	Brand:NTN; Product Group:B04334; Characteristic outer ring frequency, BPF0:7.71 Hz; Nlim (grease):4,800 rpm; ra max:0.8 mm; Characteristic cage frequency, FTF:0.43 Hz; Max operating temperature, Tmax:120 °C; Manufacturer Name:NTN; Category:Roller Bearings; Dynamic load, C:76.5 kN;
Komatsu Flange 361-30-21110 Flange	e:8.4 mm; N:6,5mm; H:81 mm; L:58.7 mm; B:22 mm; G:M6x1; s1:11 mm; A:15 mm; d:15.88 mm; Designation of bearing:US202-10G2T04;
Komatsu Flange 23A-30-11501 Flange	Holder Surface Treatment:Electroless Nickel P; Seals:DD (Contact Rubber S; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Days to Ship:8 Days; T(mm):35 ～ 50; Height H(mm):40 ～ 60; Bearing Retained:No; Bearing I.D. d(mm):20; Number of Bearings:Double;