| Komatsu Pump assembly "705-22-38150 Pump assembly | Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type; Bearing Part Number:6000; Seals:VV (Non-Contact Rubb; Width T(mm):30 ～ 60; Bearing I.D. d(mm):10; Flange Shape:Compact Type; |
| Komatsu Pump assembly "705-34-22540 Pump assembly | Designation of bearing:UC212-39G2T20; Weight:4.15 kg; L1:52 mm; H:69.9 mm; N:M16; G:M6x1; S:25.4 mm; Recommended tightening torque for set screw:16.8 Nm; A:68 mm; C:52.5 kN; |
| Komatsu Pump assembly "705-56-36010 Pump assembly | C0:6.65 kN; S:7 mm; Z:45.6 mm; SW:3 mm; d:20 mm; L:264 mm; Designation of closed end cover:SCC204; Weight:1.59 kg; A5:18 mm; Designation of housing:SP203-205/47N-; |
| Komatsu Pump assembly " | Grease Lubrication - B/C/O Seal:1500 rpm; Shaft Size :60 mm; Float:0.083 in; C - Dynamic Load (Basic):46400 lb; Dimension M:2.13 in; Shaft Size Type:Metric; Dimension C:3.62 in; Dimension BC:6.75 in; Dimension L Exp:3.57 in; Dimension J (Bolt Size):0.625 in; |
| Komatsu Pump assembly " | C0:7.88 kN; L3:38 mm; Designation of bearing:UC205G2T20; A5:19.7 mm; E:22 mm; B:34 mm; d:25 mm; C:14 kN; T max.:200 °C; A2:35 mm; |
| Komatsu Pump assembly " | S:14.3 mm; L:140 mm; s1:17.05 mm; Recommended tightening torque for set screw:3.9 Nm; Z:46.8 mm; H1:16 mm; C:11 kN; Designation of housing:SP205N-; J:105 mm; Dz:60 mm; |
| Komatsu Pump assembly "705-51-30170 Pump assembly | d1:65.4 mm; rs min:1.5 mm; D1:90.9 mm; Static load, C0:29.3 kN; f0:14.3; Characteristic inner ring frequency, BPFI:5.92 Hz; Dynamic load, C:42.6 kN; Radial clearance class:C3; Mass:0.6 kg; da max:65.4 mm; |
| Komatsu Pump assembly "705-22-40110 Pump assembly | Tightening Method:Standard Type; Material:52100 Bearing Steel; Roller Guiding Method:Retainer Type; B:12; Basic Load Rating Cr (Dynamic)(kN):5.33; Category:Cam Followers; Thread Size on Cam Follower (M)(mm):M10; Volume Discount:Available; RoHS:6; |