| Komatsu Pump assembly " | Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type; Bearing Part Number:6000; Seals:VV (Non-Contact Rubb; Width T(mm):30 ～ 60; Bearing I.D. d(mm):10; Flange Shape:Compact Type; |
| Komatsu Pump assembly "705-22-36150 Pump assembly | db - Cone Backface Backing Diameter:53 mm; d:45.000 mm; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (1 million revolutions)6:78700 N; K - Factor8:1.49; da - Cone Frontface Backing Diameter:51 mm; C0 - Static Radial Rating:84300 N; R - Cone Backface To Clear Radius3:1.020 mm; Cone Part Number:X32009X; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:30800 lbf; |
| Komatsu Pump assembly "705-51-20160 Pump assembly | Designation of bearing:UC212-39G2T20; Weight:4.15 kg; L1:52 mm; H:69.9 mm; N:M16; G:M6x1; S:25.4 mm; Recommended tightening torque for set screw:16.8 Nm; A:68 mm; C:52.5 kN; |
| Komatsu Pump assembly "705-52-42170 Pump assembly | Designation of bearing:UC212-39G2T20; Weight:4.15 kg; L1:52 mm; H:69.9 mm; N:M16; G:M6x1; S:25.4 mm; Recommended tightening torque for set screw:16.8 Nm; A:68 mm; C:52.5 kN; |
| Komatsu Pump assembly " | d1:65.4 mm; rs min:1.5 mm; D1:90.9 mm; Static load, C0:29.3 kN; f0:14.3; Characteristic inner ring frequency, BPFI:5.92 Hz; Dynamic load, C:42.6 kN; Radial clearance class:C3; Mass:0.6 kg; da max:65.4 mm; |
| Komatsu Pump assembly "6738-81-8092 Turbocharger | S:14.3 mm; L:140 mm; s1:17.05 mm; Recommended tightening torque for set screw:3.9 Nm; Z:46.8 mm; H1:16 mm; C:11 kN; Designation of housing:SP205N-; J:105 mm; Dz:60 mm; |
| Komatsu Pump assembly " | Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type; Bearing Part Number:6000; Seals:VV (Non-Contact Rubb; Width T(mm):30 ～ 60; Bearing I.D. d(mm):10; Flange Shape:Compact Type; |
| Komatsu Pump assembly "6156-71-1132 Pump assembly | Weight:55 lb; Dimension L:4.6 in; Locking Style:Single V-Lock; Pre Install Clearance Max:0.0055 in; Y2 - Geometry Factor:3.80; Dimension D:9.040 in; Grease Lubrication - T Seal:1200 rpm; Eng Internal Radial Clearance - Min:0.0053; C - Dynamic Load (Basic):125000 lb; Pre Install Clearance Min:0.0043 in; |