Komatsu Seat assembly "22B-57-11100 Seat assembly	Fit:J7; Surface Treatment:No; Accessory:With steel plate cov; Stroke:No; Bearing Unit, Type:Pillow Type; Machining:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Seal:Silicone;
Komatsu Seat assembly "	d:22.22 mm; S:7.5 mm; A2:35.5 mm; Weight:0.58 kg; T max.:100 °C; Z:24.2 mm; A1:13 mm; L:68 mm; A:27 mm; Designation of bearing:US205-14G2T04;
Komatsu Seat assembly "	Fit:J7; Surface Treatment:No; Accessory:With steel plate cov; Stroke:No; Bearing Unit, Type:Pillow Type; Machining:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Seal:Silicone;
Komatsu Seat assembly "144-813-1390 Seat assembly	A1:7 mm; C0:20.8 kN; T max.:100 °C; A:10 mm; Designation of bearing:US209-26G2; Recommended tightening torque for set screw:8 Nm; B:41.2 mm; N:13,5mm; Weight:1.45 kg; S:10.2 mm;
Komatsu Seat assembly "425-15-25130 Seat assembly	d:38.1 mm; T min.:-20 °C; Recommended tightening torque for set screw:8 Nm; SW:3.97 mm; A5:30.2 mm; Designation of bearing:UC208-24G2; G:R1/8"; H:120 mm; S:19 mm; H2:61 mm;
Komatsu Seat assembly "195-40-11115 Seat assembly	T max.:100 °C; d1:32.4 mm; Weight:0.75 kg; s1:24.2 mm; N:19mm; Recommended tightening torque for set screw:3.7 Nm; A5:13.9 mm; L1:61 mm; A1:12 mm; C0:6.65 kN;
Komatsu Seat assembly "	H1:21.5 mm; L1:54.5 mm; T min.:-40 °C; Designation of housing:PE209-; Designation of bearing:EX209-27G2T04; N:14mm; C:31.85 kN; C0:20.8 kN; L:192 mm; G:R1/8";
Komatsu Seat assembly "	da max:117 mm; dc min:130 mm; ra max:2 mm; Static load, C0:305 kN; r1s min:2.1 mm; Max operating temperature, Tmax:120 °C; Nlim (grease):3,500 rpm; Characteristic inner ring frequency, BPFI:9.83 Hz; Mass (without HJ ring):3.66 kg; D:180 mm;