Komatsu Seat assembly "428-03-21930 Seat assembly	Surface Treatment:No; Rolling Element Material:Bearing Steel; Accessory:No Cover; Pillow Type, Category:Standard; Unit, Type:Insert Bearing Unit; Machining:No; Fit:J7; RoHS:6; Bearing Unit, Type:Pillow Type; Basic Load Rating, Dynamic Rating(N):34100;
Komatsu Seat assembly "195-57-46111 Seat assembly	C1:6.2 mm; T min.:-20 °C; T max.:100 °C; d:25.4 mm; SW:3.18 mm; G:1/4-28UNF; C0:11.5 kN; B:38 mm; S:15 mm; m:6 mm;
Komatsu Seat assembly "	S:26 mm; A:56 mm; T min.:-20 °C; C0:51.8 kN; s1:35.5 mm; e:33 mm; J:150 mm; Designation of housing:F312-; N:23mm; B:71 mm;
Komatsu Seat assembly "415-57-11242 Seat assembly	d:22.22 mm; S:7.5 mm; A2:35.5 mm; Weight:0.58 kg; T max.:100 °C; Z:24.2 mm; A1:13 mm; L:68 mm; A:27 mm; Designation of bearing:US205-14G2T04;
Komatsu Seat assembly "	A1:7 mm; C0:20.8 kN; T max.:100 °C; A:10 mm; Designation of bearing:US209-26G2; Recommended tightening torque for set screw:8 Nm; B:41.2 mm; N:13,5mm; Weight:1.45 kg; S:10.2 mm;
Komatsu Seat assembly "23E-15-15151 Seat assembly	Dimension C:5.13 in; Dimension A:3.75 in; Dimension L:4.47 in; Grease Lubrication - B/C/O Seal:1000 rpm; Eng Internal Radial Clearance - Min:0.0024; Locking Style:Double Concentric; Y2 - Geometry Factor:4.31; Oil Lubrication - T Seal:2400 rpm; Dimension B:7.69 in; Housing Style:Four-Bolt Pillow Blo;
Komatsu Seat assembly "198-15-25140 Seat assembly	da max:117 mm; dc min:130 mm; ra max:2 mm; Static load, C0:305 kN; r1s min:2.1 mm; Max operating temperature, Tmax:120 °C; Nlim (grease):3,500 rpm; Characteristic inner ring frequency, BPFI:9.83 Hz; Mass (without HJ ring):3.66 kg; D:180 mm;
Komatsu Seat assembly "232-57-56300 Seat assembly	T max.:100 °C; d1:32.4 mm; Weight:0.75 kg; s1:24.2 mm; N:19mm; Recommended tightening torque for set screw:3.7 Nm; A5:13.9 mm; L1:61 mm; A1:12 mm; C0:6.65 kN;