Komatsu Protector 23B-915-1310 Protector 566-74-41460 Protector | End Cover1:EC513-611; Shaft Diameter db:65 mm; Jmax:215 mm; H2:28.00 mm; H:128 mm; UPC Code:999999999; Material :Cast Iron; Max Grease Speed:4700; L:255 mm; Cage Type:EJ; |
Komatsu Protector 209-956-7230 Protector 20Y-954-2111 Protector | L:200 mm; C:66 kN; A2:78.5 mm; d:75 mm; A:56 mm; Recommended tightening torque for set screw:33 Nm; J:159 mm; N:19mm; G:M10x1; Designation of housing:F215-; |
Komatsu Protector 416-54-26411 Protector 17A-30-21631 Protector | Design Units:Imperial; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:51700 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:21100 lbf; da - Cone Frontface Backing Diameter:7.99 in; K - Factor8:1.41; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:199000 lbf; Ab - Cage-Cone Frontface Clearance:0.14 in; C90 - Dynamic Radial Rating (90 million revolutions)5:29700 lbf; |
Komatsu Protector 195-30-12211 Protector 207-03-61330 Protector | Weight:0.61 kg; s1:15.5 mm; L:76 mm; Recommended tightening torque for set screw:3.7 Nm; S:12.7 mm; Designation of bearing:UC201-08G2L4; T min.:-20 °C; G:M6x1; H2:62 mm; J:52 mm; |
Komatsu Protector 8242-70-2340 Protector 195-979-8240 Protector | Bearing Part Number:6001; Bearing Used:Deep Groove Ball Bea; Shape:Front Mount; Lateral Width L(mm):36; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Height H(mm):25 ~ 35; Type:Bearings with Housin; Holder Surface Treatment:Not Provided; |
Komatsu Protector 130-54-73111 Protector 203-03-61650 Protector | L1:21 mm; J:50.8 mm; T min.:-20 °C; A:36 mm; L:70 mm; d:25 mm; d1:37.4 mm; Weight:0.65 kg; H:36.5 mm; E:12.5 mm; |
Komatsu Protector 56B-54-12413 Protector 566-54-6A530 Protector | Weight:0.61 kg; s1:15.5 mm; L:76 mm; Recommended tightening torque for set screw:3.7 Nm; S:12.7 mm; Designation of bearing:UC201-08G2L4; T min.:-20 °C; G:M6x1; H2:62 mm; J:52 mm; |
Komatsu Protector 12F-30-41220 Protector 134-54-61721 Protector | Weight:0.61 kg; s1:15.5 mm; L:76 mm; Recommended tightening torque for set screw:3.7 Nm; S:12.7 mm; Designation of bearing:UC201-08G2L4; T min.:-20 °C; G:M6x1; H2:62 mm; J:52 mm; |