| Komatsu Protector 8206-70-5350 Protector 195-30-12221 Protector | J:157 mm; H:190 mm; s1:25.8 mm; d:49.21 mm; Weight:2.22 kg; Z:64.7 mm; Designation of bearing:UC210-31G2T20; A1:13 mm; N:18mm; A2:56.6 mm; |
| Komatsu Protector 195-54-23150 Protector 20Y-30-21250 Protector | L:200 mm; C:66 kN; A2:78.5 mm; d:75 mm; A:56 mm; Recommended tightening torque for set screw:33 Nm; J:159 mm; N:19mm; G:M10x1; Designation of housing:F215-; |
| Komatsu Protector 8232-70-1520 Protector 569-54-61782 Protector | J:157 mm; H:190 mm; s1:25.8 mm; d:49.21 mm; Weight:2.22 kg; Z:64.7 mm; Designation of bearing:UC210-31G2T20; A1:13 mm; N:18mm; A2:56.6 mm; |
| Komatsu Protector 569-74-61660 Protector 419-03-11241 Protector | End Cover1:EC513-611; Shaft Diameter db:65 mm; Jmax:215 mm; H2:28.00 mm; H:128 mm; UPC Code:999999999; Material :Cast Iron; Max Grease Speed:4700; L:255 mm; Cage Type:EJ; |
| Komatsu Protector 23D-23-11621 Protector 21Y-30-11210 Protector | a - Effective Center Location4:-0.13 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:48200 lbf; C0 - Static Radial Rating:32000 lbf; C90 - Dynamic Radial Rating (90 million revolutions)5:7180 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:27700 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:4950 lbf; G2 - Heat Generation Factor (Rib-Roller End):20.2; Cage Type:Stamped Steel; |
| Komatsu Protector 145-30-48110 Protector 21M-30-12350 Protector | A2:58.9 mm; A:40 mm; B1:56.3 mm; s1:39.7 mm; T max.:200 °C; L:137 mm; d1:62 mm; Designation of housing:FE209N-; Recommended tightening torque for set screw:11.5 Nm; Weight:2.37 kg; |
| Komatsu Protector 134-30-64231 Protector 208-30-67130 Protector | RoHS:6; Shape:Flanged Pilot Type; Bearing Used:Deep Groove Ball Bea; Width T(mm):25 ～ 50; Bearing Material:Stainless Steel; Bearing Part Number:6801; Housing Material:[Aluminum Alloy] 201; Holder Surface Treatment:Clear Anodize; Type:Bearings with Housin; Days to Ship:7 Days; |
| Komatsu Protector 103-54-35120 Protector 19M-30-12110 Protector | Weight:0.61 kg; s1:15.5 mm; L:76 mm; Recommended tightening torque for set screw:3.7 Nm; S:12.7 mm; Designation of bearing:UC201-08G2L4; T min.:-20 °C; G:M6x1; H2:62 mm; J:52 mm; |