Komatsu tool 310-32-05061KF tool	SW:3.18 mm; T max.:100 °C; T min.:-40 °C; H2:41 mm; B:30 mm; H:98 mm; Recommended tightening torque for set screw:3.7 Nm; d:31.75 mm; Designation of housing:SP206-207/62-; L:274 mm;
Komatsu tool 795-799-1500 tool	Combination symbol:No; Spacer, Sleeve symbol:No; Raceway Ring Shape:Tapered Roller; Material Symbol:No; Special Configurations Code:No; I.D.(Ø):240; Symbol of Bearing Ring Shape:No; Days to Ship:8 Days; Inner/Outer Ring Material:Steel; Load Direction:Radial;
Komatsu tool 232-62-05030 tool	SW:3.18 mm; T max.:100 °C; T min.:-40 °C; H2:41 mm; B:30 mm; H:98 mm; Recommended tightening torque for set screw:3.7 Nm; d:31.75 mm; Designation of housing:SP206-207/62-; L:274 mm;
Komatsu tool 428-15-05032 tool	Seal:Nitrile; Surface Treatment:No; Unit Body Material:Cast Iron; d:75; Bearing Unit, Type:Round flange shape; Basic Load Rating, Dynamic Rating(N):84000; Unit, Type:Insert Bearing Unit; Stroke:No; Bearing Inner Dia. Shape:Tapered hole adapter;
Komatsu tool 21P-60-K4520 tool	Number of lubrication holes:3; Da max:78 mm; Characteristic outer ring frequency, BPF0:7.15 Hz; k:2.5 mm; Brand:SNR; ra max:1 mm; Characteristic inner ring frequency, BPFI:9.85 Hz; D:85 mm; rs min:1.1 mm; Nref:7,400 rpm;
Komatsu tool 207-98-61130 tool	Flange O.D. H(φ):114; Seals:DD (Contact Rubber S; Bearing I.D. d(mm):40; Days to Ship:8 Days or more; Width T(mm):65 ～ 120; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Bearing Material:[Steel] Steel;
Komatsu tool 266-59-85100 tool	Bearing Retained:Yes (with retaining; Shape:Flanged Pilot Type; Number of Bearings:Single; Volume Discount:Available; Bearing Material:[Steel] Steel; Days to Ship:7 Days; Flange O.D. H(φ):64; Bearing Part Number:6202; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea;
Komatsu tool 561-87-05010 tool	Static load, C0:1.07 kN; D2:27.25 mm; r1s min:0.3 mm; Mass:0.02 kg; f0:8.07; Precision class:P4S; d1:21 mm; Preload value:0.035 kN; D1:26.65 mm; Preload level:8;