Komatsu tool 195-30-05030 tool	SW:3.18 mm; T max.:100 °C; T min.:-40 °C; H2:41 mm; B:30 mm; H:98 mm; Recommended tightening torque for set screw:3.7 Nm; d:31.75 mm; Designation of housing:SP206-207/62-; L:274 mm;
Komatsu tool 707-98-36280 tool	Static load, C0:1.07 kN; D2:27.25 mm; r1s min:0.3 mm; Mass:0.02 kg; f0:8.07; Precision class:P4S; d1:21 mm; Preload value:0.035 kN; D1:26.65 mm; Preload level:8;
Komatsu tool 566-22-05013 tool	Seal:Nitrile; Surface Treatment:No; Unit Body Material:Cast Iron; d:75; Bearing Unit, Type:Round flange shape; Basic Load Rating, Dynamic Rating(N):84000; Unit, Type:Insert Bearing Unit; Stroke:No; Bearing Inner Dia. Shape:Tapered hole adapter;
Komatsu tool 5-87811-308-6KF tool	RoHS:6; O.D. D(φ):30; Application:For Outer Ring; L Dimension Tolerance:Positive Tolerance; Days to Ship:7 Days; Surface Treatment:Black Oxide Coating; Material:Low Carbon Steel; L(mm):3 ～ 100;
Komatsu tool 198-15-05020 tool	Static load, C0:1.07 kN; D2:27.25 mm; r1s min:0.3 mm; Mass:0.02 kg; f0:8.07; Precision class:P4S; d1:21 mm; Preload value:0.035 kN; D1:26.65 mm; Preload level:8;
Komatsu tool 15B-15-05021 tool	K - Factor7:1.83; e - ISO Factor8:0.32; D:289.974 mm; R - Cone Backface To Clear Radius1:7.110 mm; C - Cup Width:48.001 mm; Ab - Cage-Cone Frontface Clearance:3.3 mm; B:63.503 mm; r - Cup Backface To Clear Radius2:3.05 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:26600 lbf; G2 - Heat Generation Factor (Rib-Roller End):95.5;
Komatsu tool 125-15-05120 tool	Number of lubrication holes:3; Da max:78 mm; Characteristic outer ring frequency, BPF0:7.15 Hz; k:2.5 mm; Brand:SNR; ra max:1 mm; Characteristic inner ring frequency, BPFI:9.85 Hz; D:85 mm; rs min:1.1 mm; Nref:7,400 rpm;
Komatsu tool 707-98-34580 tool	Bearing Retained:Yes (with retaining; Shape:Flanged Pilot Type; Number of Bearings:Single; Volume Discount:Available; Bearing Material:[Steel] Steel; Days to Ship:7 Days; Flange O.D. H(φ):64; Bearing Part Number:6202; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea;