Komatsu tool 79A-222-2010 tool	K - Factor7:1.83; e - ISO Factor8:0.32; D:289.974 mm; R - Cone Backface To Clear Radius1:7.110 mm; C - Cup Width:48.001 mm; Ab - Cage-Cone Frontface Clearance:3.3 mm; B:63.503 mm; r - Cup Backface To Clear Radius2:3.05 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:26600 lbf; G2 - Heat Generation Factor (Rib-Roller End):95.5;
Komatsu tool 234-27-07011 tool	H2:111 mm; Designation of housing:T216-; L3:121 mm; T min.:-20 °C; L1:140 mm; A:70 mm; L2:21 mm; C0:54.2 kN; N:41mm; Weight:8.66 kg;
Komatsu tool 567-15-05210 tool	SW:3.18 mm; T max.:100 °C; T min.:-40 °C; H2:41 mm; B:30 mm; H:98 mm; Recommended tightening torque for set screw:3.7 Nm; d:31.75 mm; Designation of housing:SP206-207/62-; L:274 mm;
Komatsu tool 19M-15-05020 tool	K - Factor7:1.83; e - ISO Factor8:0.32; D:289.974 mm; R - Cone Backface To Clear Radius1:7.110 mm; C - Cup Width:48.001 mm; Ab - Cage-Cone Frontface Clearance:3.3 mm; B:63.503 mm; r - Cup Backface To Clear Radius2:3.05 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:26600 lbf; G2 - Heat Generation Factor (Rib-Roller End):95.5;
Komatsu tool 707-99-55500 tool	Flange O.D. H(φ):114; Seals:DD (Contact Rubber S; Bearing I.D. d(mm):40; Days to Ship:8 Days or more; Width T(mm):65 ～ 120; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Bearing Material:[Steel] Steel;
Komatsu tool 566-22-05013 tool	Seal:Nitrile; Surface Treatment:No; Unit Body Material:Cast Iron; d:75; Bearing Unit, Type:Round flange shape; Basic Load Rating, Dynamic Rating(N):84000; Unit, Type:Insert Bearing Unit; Stroke:No; Bearing Inner Dia. Shape:Tapered hole adapter;
Komatsu tool 707-98-34420 tool	Material:304 Stainless Steel; Days to Ship:22 Days or more; I.D.(φ):4.5; Thickness T(mm):4; RoHS:6; Outer Diameter D(φ):32; Surface Treatment:No;
Komatsu tool 567-35-01101 tool	Static load, C0:1.07 kN; D2:27.25 mm; r1s min:0.3 mm; Mass:0.02 kg; f0:8.07; Precision class:P4S; d1:21 mm; Preload value:0.035 kN; D1:26.65 mm; Preload level:8;