Komatsu tool 566-15-05510 tool	Bc:20 mm; Weight / Kilogram:0.032; Characteristic outer ring frequency, BPF0:4.58 Hz; Category:Bearings; Lw:15.8 mm; Brand:NTN; b:20 mm; Dw:4 mm; Cr:21.7 kN; Mass:0.03 kg;
Komatsu tool 707-99-75440 tool	Combination symbol:No; Spacer, Sleeve symbol:No; Raceway Ring Shape:Tapered Roller; Material Symbol:No; Special Configurations Code:No; I.D.(Ø):240; Symbol of Bearing Ring Shape:No; Days to Ship:8 Days; Inner/Outer Ring Material:Steel; Load Direction:Radial;
Komatsu tool 790-434-1800 tool	K - Factor7:1.83; e - ISO Factor8:0.32; D:289.974 mm; R - Cone Backface To Clear Radius1:7.110 mm; C - Cup Width:48.001 mm; Ab - Cage-Cone Frontface Clearance:3.3 mm; B:63.503 mm; r - Cup Backface To Clear Radius2:3.05 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:26600 lbf; G2 - Heat Generation Factor (Rib-Roller End):95.5;
Komatsu tool 234-27-05014 tool	Bc:20 mm; Weight / Kilogram:0.032; Characteristic outer ring frequency, BPF0:4.58 Hz; Category:Bearings; Lw:15.8 mm; Brand:NTN; b:20 mm; Dw:4 mm; Cr:21.7 kN; Mass:0.03 kg;
Komatsu tool 419-64-25861 tool	Number of lubrication holes:3; Da max:78 mm; Characteristic outer ring frequency, BPF0:7.15 Hz; k:2.5 mm; Brand:SNR; ra max:1 mm; Characteristic inner ring frequency, BPFI:9.85 Hz; D:85 mm; rs min:1.1 mm; Nref:7,400 rpm;
Komatsu tool 795-233-1100 tool	Da max:75 mm; f0:15.6; D3 max:76.81 mm; Brand:SNR; Min operating temperature, Tmin:-20 °C; Characteristic rolling element frequency, BSF:7.37 Hz; a min:2.29 mm; Mass:0.27 kg; da max:59.7 mm; Characteristic inner ring frequency, BPFI:7.93 Hz;
Komatsu tool 707-99-41110 tool	Material:304 Stainless Steel; Days to Ship:22 Days or more; I.D.(φ):4.5; Thickness T(mm):4; RoHS:6; Outer Diameter D(φ):32; Surface Treatment:No;
Komatsu tool 707-99-40065 tool	Combination symbol:No; Spacer, Sleeve symbol:No; Raceway Ring Shape:Tapered Roller; Material Symbol:No; Special Configurations Code:No; I.D.(Ø):240; Symbol of Bearing Ring Shape:No; Days to Ship:8 Days; Inner/Outer Ring Material:Steel; Load Direction:Radial;