Komatsu tool 790-434-1800 tool	K - Factor7:1.83; e - ISO Factor8:0.32; D:289.974 mm; R - Cone Backface To Clear Radius1:7.110 mm; C - Cup Width:48.001 mm; Ab - Cage-Cone Frontface Clearance:3.3 mm; B:63.503 mm; r - Cup Backface To Clear Radius2:3.05 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:26600 lbf; G2 - Heat Generation Factor (Rib-Roller End):95.5;
Komatsu tool 567-33-05011 tool	H2:111 mm; Designation of housing:T216-; L3:121 mm; T min.:-20 °C; L1:140 mm; A:70 mm; L2:21 mm; C0:54.2 kN; N:41mm; Weight:8.66 kg;
Komatsu tool 195-63-05091 tool	Bearing Retained:Yes (with retaining; Shape:Flanged Pilot Type; Number of Bearings:Single; Volume Discount:Available; Bearing Material:[Steel] Steel; Days to Ship:7 Days; Flange O.D. H(φ):64; Bearing Part Number:6202; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea;
Komatsu tool 567-15-05013 tool	RoHS:6; O.D. D(φ):30; Application:For Outer Ring; L Dimension Tolerance:Positive Tolerance; Days to Ship:7 Days; Surface Treatment:Black Oxide Coating; Material:Low Carbon Steel; L(mm):3 ～ 100;
Komatsu tool 234-63-05050 tool	Number of lubrication holes:3; Da max:78 mm; Characteristic outer ring frequency, BPF0:7.15 Hz; k:2.5 mm; Brand:SNR; ra max:1 mm; Characteristic inner ring frequency, BPFI:9.85 Hz; D:85 mm; rs min:1.1 mm; Nref:7,400 rpm;
Komatsu tool 423-15-05130 tool	SW:3.18 mm; T max.:100 °C; T min.:-40 °C; H2:41 mm; B:30 mm; H:98 mm; Recommended tightening torque for set screw:3.7 Nm; d:31.75 mm; Designation of housing:SP206-207/62-; L:274 mm;
Komatsu tool 23S-15-05211 tool	Flange O.D. H(φ):114; Seals:DD (Contact Rubber S; Bearing I.D. d(mm):40; Days to Ship:8 Days or more; Width T(mm):65 ～ 120; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Bearing Material:[Steel] Steel;
Komatsu tool 714-16-05111 tool	RoHS:6; O.D. D(φ):30; Application:For Outer Ring; L Dimension Tolerance:Positive Tolerance; Days to Ship:7 Days; Surface Treatment:Black Oxide Coating; Material:Low Carbon Steel; L(mm):3 ～ 100;