Komatsu Oil sump "6754-21-4122 Oil sump	Shaft:Provided; Roller Guiding Method:Retainer Type; Cam Follower Type:Standard; B:12; Seals:Provided; D:22; Basic Load Rating Cr (Dynamic)(kN):5.33; Roller Lining:None; Tightening Method:Hex Socket on Head;
Komatsu Oil sump "6206-21-5170 Oil sump	Center of Bearing from Housing End A2:24.5 mm; Housing Width A:38.9 mm; Bolt Hole Spacing J:148.00 mm; Flange Thickness A1:12.70 mm; Total Length H:179.4 mm; Inside Ring Outside Diameter:2.480 in; Seal Type:Molded Shroud; Center of Bearing from Bearing End S:24.5 mm; Total Height L:111.1 mm; Inside Ring Width B:43.70 mm;
Komatsu Oil sump "6742-01-3640KN Oil sump	Bearing Retained:Yes (with retaining; Housing Material:[Aluminum Alloy] 201; Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Bearing I.D. d(mm):12; Bearing Used:Deep Groove Ball Bea; RoHS:6; Volume Discount:Available; Bearing Part Number:6801;
Komatsu Oil sump "6138-21-5130 Oil sump	Bearing Retained:Yes (with retaining; Housing Material:[Aluminum Alloy] 201; Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Bearing I.D. d(mm):12; Bearing Used:Deep Groove Ball Bea; RoHS:6; Volume Discount:Available; Bearing Part Number:6801;
Komatsu Oil sump "	Shaft:Provided; Roller Guiding Method:Retainer Type; Cam Follower Type:Standard; B:12; Seals:Provided; D:22; Basic Load Rating Cr (Dynamic)(kN):5.33; Roller Lining:None; Tightening Method:Hex Socket on Head;
Komatsu Oil sump "	Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Bearing I.D. d(mm):20; Type:Bearings with Housin; Shape:L-Shaped; Holder Surface Treatment:Black Oxide Coating; Bearing Part Number:6904; Width T(mm):29; RoHS:6;
Komatsu Oil sump "6222-23-5110 Oil sump	N:13mm; Dz:60 mm; B:27 mm; T max.:100 °C; L:140 mm; Designation of open end cover:SCOU205-16; H1:16 mm; C0:7.88 kN; S:7.5 mm; C:14 kN;
Komatsu Oil sump "9-11360-614-1KF Oil sump	Y0:1.16; d:17 mm; e:0.29; Rating life coefficient, A2:2.8; ISO 355 reference:T2FB017; C:12 mm; Da max:41.5 mm; rs min:1 mm; ra max:1 mm; Cb min:3.5 mm;