| Komatsu Support and stop the use of a lump " | rs min:0.6 mm; B:12 mm; ra max:0.6 mm; Characteristic rolling element frequency, BSF:5.49 Hz; Mass:0.08 kg; Static load, C0:5.85 kN; D:47 mm; Nlim (grease):15,000 rpm; Da max:43 mm; Fatigue limit load, Cu:0.27 kN; |
| Komatsu Support and stop the use of a lump "23S-46-36270 Support and stop the use of a lump | RoHS:6; Seals:ZZ (Double Shield); Bearing Retained:Yes (with retaining; Shape:Bottom Mount; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Not Provided; Housing Material:304 Stainless Steel; Type:Bearings with Housin; Width T(mm):12; |
| Komatsu Support and stop the use of a lump " | Bearing Retained:Yes (with retaining; Bearing Part Number:6200; Holder Surface Treatment:Electroless Nickel P; Type:Bearings with Housin; Bearing I.D. d(mm):10; Width T(mm):40; Flange Shape:Round Type; Volume Discount:Available; Number of Bearings:Double; Flange O.D. H(φ):54; |
| Komatsu Support and stop the use of a lump " | Grease Lubrication - M/N Seal:900 rpm; Float:0.083 in; Dimension A:4.92 in; Adapter Sleeve Axial Movement Min:0.03 in; Int Radial Clearance Reduction Min:0.0020 in; Dimension D Min:11.88 in; Dimension D Max:14.50 in; Housing Style:Four-Bolt Pillow Blo; Grease Lubrication - B/C/O Seal:600 rpm; Oil Lubrication - T Seal:1700 rpm; |
| Komatsu Support and stop the use of a lump "708-21-13160 Support and stop the use of a lump | RoHS:6; Seals:ZZ (Double Shield); Bearing Retained:Yes (with retaining; Shape:Bottom Mount; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Not Provided; Housing Material:304 Stainless Steel; Type:Bearings with Housin; Width T(mm):12; |
| Komatsu Support and stop the use of a lump "566-88-6B220 Support and stop the use of a lump | A1:10 mm; S:17 mm; B1:43.5 mm; A2:45.5 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:100 °C; d1:32.4 mm; J:63.5 mm; T min.:-20 °C; B:34 mm; |
| Komatsu Support and stop the use of a lump "209-62-61260 Support and stop the use of a lump | Bearing Retained:Yes (with retaining; Bearing Part Number:6200; Holder Surface Treatment:Electroless Nickel P; Type:Bearings with Housin; Bearing I.D. d(mm):10; Width T(mm):40; Flange Shape:Round Type; Volume Discount:Available; Number of Bearings:Double; Flange O.D. H(φ):54; |
| Komatsu Support and stop the use of a lump "207-62-32840 Support and stop the use of a lump | Designation of bearing:UC212-36G2T04; S:25.4 mm; Weight:1.81 kg; T max.:100 °C; T min.:-40 °C; Designation of open end cover:SCOU212-36; P:300 mm; B:65.1 mm; d:57.15 mm; Z:60.8 mm; |