Komatsu Support and stop the use of a lump "209-62-71121 Support and stop the use of a lump	Flange Shape:Square Type; Holder Surface Treatment:Electroless Nickel P; Shape:Flanged Pilot Type; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Width T(mm):45; Bearing Material:[Steel] Steel;
Komatsu Support and stop the use of a lump "	Flange Shape:Square Type; Holder Surface Treatment:Electroless Nickel P; Shape:Flanged Pilot Type; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Width T(mm):45; Bearing Material:[Steel] Steel;
Komatsu Support and stop the use of a lump "	H1:19 mm; N1:21 mm; C0:15.6 kN; H2:94 mm; s1:21.45 mm; Weight:1.97 kg; Designation of housing:SP207-; d:36.51 mm; T max.:100 °C; A:48 mm;
Komatsu Support and stop the use of a lump "	d1:86 mm; C:57.2 kN; T min.:-20 °C; Weight:6.2 kg; A2:81.6 mm; J:149 mm; e:30 mm; s1:57.6 mm; L:187 mm; Designation of open end cover:SCOE213-65;
Komatsu Support and stop the use of a lump "	Fatigue limit load, Cu:1.75 kN; D:110 mm; Brand:NTN; Max operating temperature, Tmax:110 °C; Da max:101 mm; Radial clearance class:C3; rs min:2 mm; d:50 mm; Dynamic load, C:62 kN; ra max:2 mm;
Komatsu Support and stop the use of a lump "	Grease Lubrication - M/N Seal:900 rpm; Float:0.083 in; Dimension A:4.92 in; Adapter Sleeve Axial Movement Min:0.03 in; Int Radial Clearance Reduction Min:0.0020 in; Dimension D Min:11.88 in; Dimension D Max:14.50 in; Housing Style:Four-Bolt Pillow Blo; Grease Lubrication - B/C/O Seal:600 rpm; Oil Lubrication - T Seal:1700 rpm;
Komatsu Support and stop the use of a lump "	rs min:0.6 mm; B:12 mm; ra max:0.6 mm; Characteristic rolling element frequency, BSF:5.49 Hz; Mass:0.08 kg; Static load, C0:5.85 kN; D:47 mm; Nlim (grease):15,000 rpm; Da max:43 mm; Fatigue limit load, Cu:0.27 kN;
Komatsu Support and stop the use of a lump "205-01-73370 Support and stop the use of a lump	Grease Lubrication - M/N Seal:900 rpm; Float:0.083 in; Dimension A:4.92 in; Adapter Sleeve Axial Movement Min:0.03 in; Int Radial Clearance Reduction Min:0.0020 in; Dimension D Min:11.88 in; Dimension D Max:14.50 in; Housing Style:Four-Bolt Pillow Blo; Grease Lubrication - B/C/O Seal:600 rpm; Oil Lubrication - T Seal:1700 rpm;