Komatsu Support and stop the use of a lump "	Grease Lubrication - M/N Seal:900 rpm; Float:0.083 in; Dimension A:4.92 in; Adapter Sleeve Axial Movement Min:0.03 in; Int Radial Clearance Reduction Min:0.0020 in; Dimension D Min:11.88 in; Dimension D Max:14.50 in; Housing Style:Four-Bolt Pillow Blo; Grease Lubrication - B/C/O Seal:600 rpm; Oil Lubrication - T Seal:1700 rpm;
Komatsu Support and stop the use of a lump "209-62-57570 Support and stop the use of a lump	rs min:0.6 mm; B:12 mm; ra max:0.6 mm; Characteristic rolling element frequency, BSF:5.49 Hz; Mass:0.08 kg; Static load, C0:5.85 kN; D:47 mm; Nlim (grease):15,000 rpm; Da max:43 mm; Fatigue limit load, Cu:0.27 kN;
Komatsu Support and stop the use of a lump "205-01-73370 Support and stop the use of a lump	Grease Lubrication - M/N Seal:900 rpm; Float:0.083 in; Dimension A:4.92 in; Adapter Sleeve Axial Movement Min:0.03 in; Int Radial Clearance Reduction Min:0.0020 in; Dimension D Min:11.88 in; Dimension D Max:14.50 in; Housing Style:Four-Bolt Pillow Blo; Grease Lubrication - B/C/O Seal:600 rpm; Oil Lubrication - T Seal:1700 rpm;
Komatsu Support and stop the use of a lump "	Housing Material:304 Stainless Steel; Bearing Material:[Steel] Steel; RoHS:6; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Not Provided; Bearing Retained:No; Flange O.D. H(φ):41; Volume Discount:Available; Bearing Part Number:626;
Komatsu Support and stop the use of a lump "	Inner/Outer Ring Material:[Steel] Steel; Type:Angular Contact Ball; Contact angle(Degree):40; Symbol of contact angle:B; Basic Load Rating, Static Rating(N):58000; Size Standards:Metric System; Rolling Element Material:[Steel] Steel; Seal, Shield Symbols:No; Width(mm):24; Basic Dynamic Load Rating(N):69000;
Komatsu Support and stop the use of a lump "	Bearing Retained:Yes (with retaining; Bearing Part Number:6200; Holder Surface Treatment:Electroless Nickel P; Type:Bearings with Housin; Bearing I.D. d(mm):10; Width T(mm):40; Flange Shape:Round Type; Volume Discount:Available; Number of Bearings:Double; Flange O.D. H(φ):54;
Komatsu Support and stop the use of a lump "427-62-15480 Support and stop the use of a lump	H1:19 mm; N1:21 mm; C0:15.6 kN; H2:94 mm; s1:21.45 mm; Weight:1.97 kg; Designation of housing:SP207-; d:36.51 mm; T max.:100 °C; A:48 mm;
Komatsu Support and stop the use of a lump "	A1:10 mm; S:17 mm; B1:43.5 mm; A2:45.5 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:100 °C; d1:32.4 mm; J:63.5 mm; T min.:-20 °C; B:34 mm;