Komatsu Support and stop the use of a lump "175-61-14541 Support and stop the use of a lump	H1:19 mm; N1:21 mm; C0:15.6 kN; H2:94 mm; s1:21.45 mm; Weight:1.97 kg; Designation of housing:SP207-; d:36.51 mm; T max.:100 °C; A:48 mm;
Komatsu Support and stop the use of a lump "	RoHS:6; Seals:ZZ (Double Shield); Bearing Retained:Yes (with retaining; Shape:Bottom Mount; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Not Provided; Housing Material:304 Stainless Steel; Type:Bearings with Housin; Width T(mm):12;
Komatsu Support and stop the use of a lump "	A1:10 mm; S:17 mm; B1:43.5 mm; A2:45.5 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:100 °C; d1:32.4 mm; J:63.5 mm; T min.:-20 °C; B:34 mm;
Komatsu Support and stop the use of a lump "	Fatigue limit load, Cu:1.75 kN; D:110 mm; Brand:NTN; Max operating temperature, Tmax:110 °C; Da max:101 mm; Radial clearance class:C3; rs min:2 mm; d:50 mm; Dynamic load, C:62 kN; ra max:2 mm;
Komatsu Support and stop the use of a lump "795-233-1140 Support and stop the use of a lump	Bearing Retained:Yes (with retaining; Bearing Part Number:6200; Holder Surface Treatment:Electroless Nickel P; Type:Bearings with Housin; Bearing I.D. d(mm):10; Width T(mm):40; Flange Shape:Round Type; Volume Discount:Available; Number of Bearings:Double; Flange O.D. H(φ):54;
Komatsu Support and stop the use of a lump "	A1:10 mm; S:17 mm; B1:43.5 mm; A2:45.5 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:100 °C; d1:32.4 mm; J:63.5 mm; T min.:-20 °C; B:34 mm;
Komatsu Support and stop the use of a lump "21P-62-K4151 Support and stop the use of a lump	Fatigue limit load, Cu:1.75 kN; D:110 mm; Brand:NTN; Max operating temperature, Tmax:110 °C; Da max:101 mm; Radial clearance class:C3; rs min:2 mm; d:50 mm; Dynamic load, C:62 kN; ra max:2 mm;
Komatsu Support and stop the use of a lump "20Y-62-43410 Support and stop the use of a lump	rs min:0.6 mm; B:12 mm; ra max:0.6 mm; Characteristic rolling element frequency, BSF:5.49 Hz; Mass:0.08 kg; Static load, C0:5.85 kN; D:47 mm; Nlim (grease):15,000 rpm; Da max:43 mm; Fatigue limit load, Cu:0.27 kN;