| Komatsu Support and stop the use of a lump " | RoHS:6; Seals:ZZ (Double Shield); Bearing Retained:Yes (with retaining; Shape:Bottom Mount; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Not Provided; Housing Material:304 Stainless Steel; Type:Bearings with Housin; Width T(mm):12; |
| Komatsu Support and stop the use of a lump "207-62-32370 Support and stop the use of a lump | Inner/Outer Ring Material:[Steel] Steel; Type:Angular Contact Ball; Contact angle(Degree):40; Symbol of contact angle:B; Basic Load Rating, Static Rating(N):58000; Size Standards:Metric System; Rolling Element Material:[Steel] Steel; Seal, Shield Symbols:No; Width(mm):24; Basic Dynamic Load Rating(N):69000; |
| Komatsu Support and stop the use of a lump "418-875-2140 Support and stop the use of a lump | d1:86 mm; C:57.2 kN; T min.:-20 °C; Weight:6.2 kg; A2:81.6 mm; J:149 mm; e:30 mm; s1:57.6 mm; L:187 mm; Designation of open end cover:SCOE213-65; |
| Komatsu Support and stop the use of a lump "419-824-1380 Support and stop the use of a lump | d1:86 mm; C:57.2 kN; T min.:-20 °C; Weight:6.2 kg; A2:81.6 mm; J:149 mm; e:30 mm; s1:57.6 mm; L:187 mm; Designation of open end cover:SCOE213-65; |
| Komatsu Support and stop the use of a lump "209-62-61250 Support and stop the use of a lump | rs min:0.6 mm; B:12 mm; ra max:0.6 mm; Characteristic rolling element frequency, BSF:5.49 Hz; Mass:0.08 kg; Static load, C0:5.85 kN; D:47 mm; Nlim (grease):15,000 rpm; Da max:43 mm; Fatigue limit load, Cu:0.27 kN; |
| Komatsu Support and stop the use of a lump "195-04-41111 Support and stop the use of a lump | Bearing Retained:Yes (with retaining; Bearing Part Number:6200; Holder Surface Treatment:Electroless Nickel P; Type:Bearings with Housin; Bearing I.D. d(mm):10; Width T(mm):40; Flange Shape:Round Type; Volume Discount:Available; Number of Bearings:Double; Flange O.D. H(φ):54; |
| Komatsu Support and stop the use of a lump " | Grease Lubrication - M/N Seal:900 rpm; Float:0.083 in; Dimension A:4.92 in; Adapter Sleeve Axial Movement Min:0.03 in; Int Radial Clearance Reduction Min:0.0020 in; Dimension D Min:11.88 in; Dimension D Max:14.50 in; Housing Style:Four-Bolt Pillow Blo; Grease Lubrication - B/C/O Seal:600 rpm; Oil Lubrication - T Seal:1700 rpm; |
| Komatsu Support and stop the use of a lump " | Bearing Type:Thrust Tapered Rolle; D1 - Small Diameter O.D.:37.938 in; E - Shoulder Diameter - Housing:30.00 in; Dynamic Load Rating:480000 lbf; r - Fillet Radius Housing (Max):0.19 in; d - Bore Diameter:28.0000 in; Static Load Rating:8390000 lbf; D - Bearing O.D.:38.0000 in; Weight:781.00 lb; H - Shoulder Diameter - Shaft:36.12 in; |