Komatsu Support and stop the use of a lump "	Flange Shape:Square Type; Holder Surface Treatment:Electroless Nickel P; Shape:Flanged Pilot Type; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Width T(mm):45; Bearing Material:[Steel] Steel;
Komatsu Support and stop the use of a lump "	Fatigue limit load, Cu:1.75 kN; D:110 mm; Brand:NTN; Max operating temperature, Tmax:110 °C; Da max:101 mm; Radial clearance class:C3; rs min:2 mm; d:50 mm; Dynamic load, C:62 kN; ra max:2 mm;
Komatsu Support and stop the use of a lump "	Inner/Outer Ring Material:[Steel] Steel; Type:Angular Contact Ball; Contact angle(Degree):40; Symbol of contact angle:B; Basic Load Rating, Static Rating(N):58000; Size Standards:Metric System; Rolling Element Material:[Steel] Steel; Seal, Shield Symbols:No; Width(mm):24; Basic Dynamic Load Rating(N):69000;
Komatsu Support and stop the use of a lump "	rs min:0.6 mm; B:12 mm; ra max:0.6 mm; Characteristic rolling element frequency, BSF:5.49 Hz; Mass:0.08 kg; Static load, C0:5.85 kN; D:47 mm; Nlim (grease):15,000 rpm; Da max:43 mm; Fatigue limit load, Cu:0.27 kN;
Komatsu Support and stop the use of a lump "	Bearing Type:Thrust Tapered Rolle; D1 - Small Diameter O.D.:37.938 in; E - Shoulder Diameter - Housing:30.00 in; Dynamic Load Rating:480000 lbf; r - Fillet Radius Housing (Max):0.19 in; d - Bore Diameter:28.0000 in; Static Load Rating:8390000 lbf; D - Bearing O.D.:38.0000 in; Weight:781.00 lb; H - Shoulder Diameter - Shaft:36.12 in;
Komatsu Support and stop the use of a lump "	H1:19 mm; N1:21 mm; C0:15.6 kN; H2:94 mm; s1:21.45 mm; Weight:1.97 kg; Designation of housing:SP207-; d:36.51 mm; T max.:100 °C; A:48 mm;
Komatsu Support and stop the use of a lump "	Grease Lubrication - M/N Seal:900 rpm; Float:0.083 in; Dimension A:4.92 in; Adapter Sleeve Axial Movement Min:0.03 in; Int Radial Clearance Reduction Min:0.0020 in; Dimension D Min:11.88 in; Dimension D Max:14.50 in; Housing Style:Four-Bolt Pillow Blo; Grease Lubrication - B/C/O Seal:600 rpm; Oil Lubrication - T Seal:1700 rpm;
Komatsu Support and stop the use of a lump "	Designation of bearing:UC212-36G2T04; S:25.4 mm; Weight:1.81 kg; T max.:100 °C; T min.:-40 °C; Designation of open end cover:SCOU212-36; P:300 mm; B:65.1 mm; d:57.15 mm; Z:60.8 mm;