| Komatsu Support and stop the use of a lump " | Inner/Outer Ring Material:[Steel] Steel; Type:Angular Contact Ball; Contact angle(Degree):40; Symbol of contact angle:B; Basic Load Rating, Static Rating(N):58000; Size Standards:Metric System; Rolling Element Material:[Steel] Steel; Seal, Shield Symbols:No; Width(mm):24; Basic Dynamic Load Rating(N):69000; |
| Komatsu Support and stop the use of a lump "20G-62-K8190 Support and stop the use of a lump | rs min:0.6 mm; B:12 mm; ra max:0.6 mm; Characteristic rolling element frequency, BSF:5.49 Hz; Mass:0.08 kg; Static load, C0:5.85 kN; D:47 mm; Nlim (grease):15,000 rpm; Da max:43 mm; Fatigue limit load, Cu:0.27 kN; |
| Komatsu Support and stop the use of a lump " | Grease Lubrication - M/N Seal:900 rpm; Float:0.083 in; Dimension A:4.92 in; Adapter Sleeve Axial Movement Min:0.03 in; Int Radial Clearance Reduction Min:0.0020 in; Dimension D Min:11.88 in; Dimension D Max:14.50 in; Housing Style:Four-Bolt Pillow Blo; Grease Lubrication - B/C/O Seal:600 rpm; Oil Lubrication - T Seal:1700 rpm; |
| Komatsu Support and stop the use of a lump "19M-61-14710 Support and stop the use of a lump | Grease Lubrication - M/N Seal:900 rpm; Float:0.083 in; Dimension A:4.92 in; Adapter Sleeve Axial Movement Min:0.03 in; Int Radial Clearance Reduction Min:0.0020 in; Dimension D Min:11.88 in; Dimension D Max:14.50 in; Housing Style:Four-Bolt Pillow Blo; Grease Lubrication - B/C/O Seal:600 rpm; Oil Lubrication - T Seal:1700 rpm; |
| Komatsu Support and stop the use of a lump " | G:M6x1; d1:62 mm; Recommended tightening torque for set screw:8 Nm; B1:56.3 mm; C0:20.8 kN; T min.:-20 °C; Designation of housing:C209-; Designation of bearing:EX209-27G2; s1:39.7 mm; A:31 mm; |
| Komatsu Support and stop the use of a lump "426-62-12940 Support and stop the use of a lump | Designation of bearing:UC212-36G2T04; S:25.4 mm; Weight:1.81 kg; T max.:100 °C; T min.:-40 °C; Designation of open end cover:SCOU212-36; P:300 mm; B:65.1 mm; d:57.15 mm; Z:60.8 mm; |
| Komatsu Support and stop the use of a lump " | Flange Shape:Square Type; Holder Surface Treatment:Electroless Nickel P; Shape:Flanged Pilot Type; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Width T(mm):45; Bearing Material:[Steel] Steel; |
| Komatsu Support and stop the use of a lump "799-404-2510 Support and stop the use of a lump | A1:10 mm; S:17 mm; B1:43.5 mm; A2:45.5 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:100 °C; d1:32.4 mm; J:63.5 mm; T min.:-20 °C; B:34 mm; |