| Komatsu Support and stop the use of a lump " | A1:10 mm; S:17 mm; B1:43.5 mm; A2:45.5 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:100 °C; d1:32.4 mm; J:63.5 mm; T min.:-20 °C; B:34 mm; |
| Komatsu Support and stop the use of a lump "142-49-14541 Support and stop the use of a lump | Fatigue limit load, Cu:1.75 kN; D:110 mm; Brand:NTN; Max operating temperature, Tmax:110 °C; Da max:101 mm; Radial clearance class:C3; rs min:2 mm; d:50 mm; Dynamic load, C:62 kN; ra max:2 mm; |
| Komatsu Support and stop the use of a lump " | Grease Lubrication - M/N Seal:900 rpm; Float:0.083 in; Dimension A:4.92 in; Adapter Sleeve Axial Movement Min:0.03 in; Int Radial Clearance Reduction Min:0.0020 in; Dimension D Min:11.88 in; Dimension D Max:14.50 in; Housing Style:Four-Bolt Pillow Blo; Grease Lubrication - B/C/O Seal:600 rpm; Oil Lubrication - T Seal:1700 rpm; |
| Komatsu Support and stop the use of a lump " | Designation of bearing:UC212-36G2T04; S:25.4 mm; Weight:1.81 kg; T max.:100 °C; T min.:-40 °C; Designation of open end cover:SCOU212-36; P:300 mm; B:65.1 mm; d:57.15 mm; Z:60.8 mm; |
| Komatsu Support and stop the use of a lump " | Designation of bearing:UC212-36G2T04; S:25.4 mm; Weight:1.81 kg; T max.:100 °C; T min.:-40 °C; Designation of open end cover:SCOU212-36; P:300 mm; B:65.1 mm; d:57.15 mm; Z:60.8 mm; |
| Komatsu Support and stop the use of a lump "418-62-23920 Support and stop the use of a lump | Inner/Outer Ring Material:[Steel] Steel; Type:Angular Contact Ball; Contact angle(Degree):40; Symbol of contact angle:B; Basic Load Rating, Static Rating(N):58000; Size Standards:Metric System; Rolling Element Material:[Steel] Steel; Seal, Shield Symbols:No; Width(mm):24; Basic Dynamic Load Rating(N):69000; |
| Komatsu Support and stop the use of a lump " | d1:86 mm; C:57.2 kN; T min.:-20 °C; Weight:6.2 kg; A2:81.6 mm; J:149 mm; e:30 mm; s1:57.6 mm; L:187 mm; Designation of open end cover:SCOE213-65; |
| Komatsu Support and stop the use of a lump " | Bearing Retained:Yes (with retaining; Bearing Part Number:6200; Holder Surface Treatment:Electroless Nickel P; Type:Bearings with Housin; Bearing I.D. d(mm):10; Width T(mm):40; Flange Shape:Round Type; Volume Discount:Available; Number of Bearings:Double; Flange O.D. H(φ):54; |