| Komatsu Support and stop the use of a lump " | Housing Material:304 Stainless Steel; Bearing Material:[Steel] Steel; RoHS:6; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Not Provided; Bearing Retained:No; Flange O.D. H(φ):41; Volume Discount:Available; Bearing Part Number:626; |
| Komatsu Support and stop the use of a lump "207-62-61740 Support and stop the use of a lump | H1:19 mm; N1:21 mm; C0:15.6 kN; H2:94 mm; s1:21.45 mm; Weight:1.97 kg; Designation of housing:SP207-; d:36.51 mm; T max.:100 °C; A:48 mm; |
| Komatsu Support and stop the use of a lump "207-62-52880 Support and stop the use of a lump | d1:86 mm; C:57.2 kN; T min.:-20 °C; Weight:6.2 kg; A2:81.6 mm; J:149 mm; e:30 mm; s1:57.6 mm; L:187 mm; Designation of open end cover:SCOE213-65; |
| Komatsu Support and stop the use of a lump " | Bearing Type:Thrust Tapered Rolle; D1 - Small Diameter O.D.:37.938 in; E - Shoulder Diameter - Housing:30.00 in; Dynamic Load Rating:480000 lbf; r - Fillet Radius Housing (Max):0.19 in; d - Bore Diameter:28.0000 in; Static Load Rating:8390000 lbf; D - Bearing O.D.:38.0000 in; Weight:781.00 lb; H - Shoulder Diameter - Shaft:36.12 in; |
| Komatsu Support and stop the use of a lump "3EE-71-23481KF Support and stop the use of a lump | Y - ISO Factor9:1.44; d:38.000 mm; C0 - Static Radial Rating:55000 N; B - Cone Width:17.000 mm; da - Cone Frontface Backing Diameter:42.42 mm; r - Cup Backface To Clear Radius2:1.27 mm; e - ISO Factor8:0.42; Series:L69300; Ab - Cage-Cone Frontface Clearance:1.8 mm; Cg - Geometry Factor:0.0692; |
| Komatsu Support and stop the use of a lump "419-915-1241 Support and stop the use of a lump | d1:86 mm; C:57.2 kN; T min.:-20 °C; Weight:6.2 kg; A2:81.6 mm; J:149 mm; e:30 mm; s1:57.6 mm; L:187 mm; Designation of open end cover:SCOE213-65; |
| Komatsu Support and stop the use of a lump " | d1:86 mm; C:57.2 kN; T min.:-20 °C; Weight:6.2 kg; A2:81.6 mm; J:149 mm; e:30 mm; s1:57.6 mm; L:187 mm; Designation of open end cover:SCOE213-65; |
| Komatsu Support and stop the use of a lump "17M-61-24311 Support and stop the use of a lump | Grease Lubrication - M/N Seal:900 rpm; Float:0.083 in; Dimension A:4.92 in; Adapter Sleeve Axial Movement Min:0.03 in; Int Radial Clearance Reduction Min:0.0020 in; Dimension D Min:11.88 in; Dimension D Max:14.50 in; Housing Style:Four-Bolt Pillow Blo; Grease Lubrication - B/C/O Seal:600 rpm; Oil Lubrication - T Seal:1700 rpm; |