Komatsu Support and stop the use of a lump "8248-75-4290 Support and stop the use of a lump	Fatigue limit load, Cu:1.75 kN; D:110 mm; Brand:NTN; Max operating temperature, Tmax:110 °C; Da max:101 mm; Radial clearance class:C3; rs min:2 mm; d:50 mm; Dynamic load, C:62 kN; ra max:2 mm;
Komatsu Support and stop the use of a lump "708-21-13160 Support and stop the use of a lump	RoHS:6; Seals:ZZ (Double Shield); Bearing Retained:Yes (with retaining; Shape:Bottom Mount; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Not Provided; Housing Material:304 Stainless Steel; Type:Bearings with Housin; Width T(mm):12;
Komatsu Support and stop the use of a lump "	Flange Shape:Square Type; Holder Surface Treatment:Electroless Nickel P; Shape:Flanged Pilot Type; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Width T(mm):45; Bearing Material:[Steel] Steel;
Komatsu Support and stop the use of a lump "208-72-56450 Support and stop the use of a lump	Bearing Type:Thrust Tapered Rolle; D1 - Small Diameter O.D.:37.938 in; E - Shoulder Diameter - Housing:30.00 in; Dynamic Load Rating:480000 lbf; r - Fillet Radius Housing (Max):0.19 in; d - Bore Diameter:28.0000 in; Static Load Rating:8390000 lbf; D - Bearing O.D.:38.0000 in; Weight:781.00 lb; H - Shoulder Diameter - Shaft:36.12 in;
Komatsu Support and stop the use of a lump "	Fatigue limit load, Cu:1.75 kN; D:110 mm; Brand:NTN; Max operating temperature, Tmax:110 °C; Da max:101 mm; Radial clearance class:C3; rs min:2 mm; d:50 mm; Dynamic load, C:62 kN; ra max:2 mm;
Komatsu Support and stop the use of a lump "	Housing Material:304 Stainless Steel; Bearing Material:[Steel] Steel; RoHS:6; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Not Provided; Bearing Retained:No; Flange O.D. H(φ):41; Volume Discount:Available; Bearing Part Number:626;
Komatsu Support and stop the use of a lump "	d1:86 mm; C:57.2 kN; T min.:-20 °C; Weight:6.2 kg; A2:81.6 mm; J:149 mm; e:30 mm; s1:57.6 mm; L:187 mm; Designation of open end cover:SCOE213-65;
Komatsu Support and stop the use of a lump "19M-61-23750 Support and stop the use of a lump	G:M6x1; d1:62 mm; Recommended tightening torque for set screw:8 Nm; B1:56.3 mm; C0:20.8 kN; T min.:-20 °C; Designation of housing:C209-; Designation of bearing:EX209-27G2; s1:39.7 mm; A:31 mm;