Komatsu flywheel assembly "	H1:25 mm; Designation of bearing:UC211-35G2T04; C0:29.2 kN; H:63.5 mm; Recommended tightening torque for set screw:16.8 Nm; J:100 mm; G:M6x1; A:60 mm; A1:34 mm; N:M16;
Komatsu flywheel assembly "6152-31-1490 flywheel assembly	Series:29500; Y2 - ISO Factor10:2.19; Bearing Weight:4.49 lb; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:51100 lbf; d:2.6250 in; Cage Type:Stamped Steel; Cg - Geometry Factor11:0.111; K - Factor7:1.27; Design Units:Imperial; Cup Part Number:29526D;
Komatsu flywheel assembly 791-627-1300 install	Snap Ring:No; Category:Single Row Ball Bear; ra max:2.5 mm; Internal Clearance:C0-Medium; Radial clearance class:CN; UNSPSC:31171504; Outside Diameter:7.48 Inch | 190 Mill; Brand:NTN; Mass:4.91 kg; Cage Material:Steel;
Komatsu flywheel assembly "	Cg - Geometry Factor11:0.0773; C1 - Dynamic Radial Rating (1 million revolutions)5:21300 lbf; Series:31500; T1 - Bearing Width:1.1563 in; B - Cone Width:1.1250 in; db - Cone Backface Backing Diameter:1.81 in; T - Bearing Width to Flange:0.4063 in; D:3 in; R - Cone Backface To Clear Radius1:0.06 in; D1 - Flange Outer Diameter:3.1836 in;
Komatsu flywheel assembly 791-480-4001 install	Series:29500; Y2 - ISO Factor10:2.19; Bearing Weight:4.49 lb; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:51100 lbf; d:2.6250 in; Cage Type:Stamped Steel; Cg - Geometry Factor11:0.111; K - Factor7:1.27; Design Units:Imperial; Cup Part Number:29526D;
Komatsu flywheel assembly 790-434-2500 install	T min.:-20 °C; N:11,5mm; A:29.3 mm; d:23.81 mm; Designation of housing:FLE205-; C:14 kN; H:124 mm; Recommended tightening torque for set screw:3.7 Nm; e:19 mm; G:R1/8";
Komatsu flywheel assembly 796-627-1020 install	L(inch):0.125 ～ 2; L Dimension Tolerance:+0.000/-0.005; Days to Ship:8 Days; RoHS:6; Material:Low Carbon Steel; Surface Treatment:Electoless Nickel Pl; D(inch):7;
Komatsu flywheel assembly "	Days to Ship:9 Days or more; Combination of two pieces:Standard; Revolution Frequency(rpm):3300; Rolling Element Material:Steel; Outer ring oil hole:Standard; Inner/Outer Ring Material:Steel; Holder Symbol:No; Specifications/Environment:Standard; Symbol of Bearing Ring Shape:No symbol: Internal; D:215;