Komatsu flywheel assembly "	D3 max:49.73 mm; d:25 mm; Snap ring reference:R52; Brand:SNR; Dynamic load, C:13.8 kN; Db min:58.5 mm; f:1.07 mm; b min:1.35 mm; r0 max:0.4 mm; Nlim:22,000 rpm;
Komatsu flywheel assembly "	T min.:-20 °C; N:11,5mm; A:29.3 mm; d:23.81 mm; Designation of housing:FLE205-; C:14 kN; H:124 mm; Recommended tightening torque for set screw:3.7 Nm; e:19 mm; G:R1/8";
Komatsu flywheel assembly "6221-31-4150 flywheel assembly	Days to Ship:9 Days or more; Combination of two pieces:Standard; Revolution Frequency(rpm):3300; Rolling Element Material:Steel; Outer ring oil hole:Standard; Inner/Outer Ring Material:Steel; Holder Symbol:No; Specifications/Environment:Standard; Symbol of Bearing Ring Shape:No symbol: Internal; D:215;
Komatsu flywheel assembly 791-430-1200 install	Cg - Geometry Factor11:0.0773; C1 - Dynamic Radial Rating (1 million revolutions)5:21300 lbf; Series:31500; T1 - Bearing Width:1.1563 in; B - Cone Width:1.1250 in; db - Cone Backface Backing Diameter:1.81 in; T - Bearing Width to Flange:0.4063 in; D:3 in; R - Cone Backface To Clear Radius1:0.06 in; D1 - Flange Outer Diameter:3.1836 in;
Komatsu flywheel assembly "	D3 max:49.73 mm; d:25 mm; Snap ring reference:R52; Brand:SNR; Dynamic load, C:13.8 kN; Db min:58.5 mm; f:1.07 mm; b min:1.35 mm; r0 max:0.4 mm; Nlim:22,000 rpm;
Komatsu flywheel assembly "	Number of Bearings:Single; Type:Bearings with Housin; Bearing Part Number:6206; Bearing Material:[Steel] Steel; Days to Ship:8 Days; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Bearing I.D. d(mm):30; Volume Discount:Available;
Komatsu flywheel assembly 791-650-1400 install	Retainer Type:Punching; Inner/Outer Ring Material:Steel; Rolling Element Material:Steel; d:55; D:72; Size Standards:Metric System; Bearing Style:Rubber Sealed; Type:Ball; Types:16**/6*** series; Days to Ship:Quote;
Komatsu flywheel assembly 793-520-2202 install	Days to Ship:9 Days or more; Combination of two pieces:Standard; Revolution Frequency(rpm):3300; Rolling Element Material:Steel; Outer ring oil hole:Standard; Inner/Outer Ring Material:Steel; Holder Symbol:No; Specifications/Environment:Standard; Symbol of Bearing Ring Shape:No symbol: Internal; D:215;