Komatsu pump 705-94-01070 pump	Shaft Size:6.75 in; Dimension J1 :24-3/8 in; Cr - Dynamic Load Rating:117993 lbf; Dimension M :7-1/2 in; Bolt Size:4 x 1-1/4; Dimension L :28 in; Maximum Speed:1220 rpm; Dimension H :7-7/8 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Dimension K :4-1/2 in;
Komatsu pump 708-1T-00711KF pump	B - Cone Width:35.000 mm; a - Effective Center Location3:-0.3 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:269000 N; Ab - Cage-Cone Frontface Clearance:3.3 mm; K - Factor7:1.31; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:53100 N; Bearing Weight:2.4 Kg; Db - Cup Backface Backing Diameter:147.07 mm; Series:32021X; r - Cup Backface To Clear Radius2:2.03 mm;
Komatsu pump 708-1T-04740 pump	Designation of bearing:US205G2T04; A:31.7 mm; C0:7.88 kN; H1:2.8 mm; Weight:0.27 kg; T min.:-40 °C; L:108 mm; d:25 mm; N:11mm; s1:13.5 mm;
Komatsu pump 705-41-05800 pump	Oil Lubrication - T Seal:2650 rpm; Locking Style:Single V-Lock; Dimension L Fix:3.42 in; Shaft Size Type:Imperial; Grease Lubrication - M/N Seal:1500 rpm; Y2 - Geometry Factor:4.48; Float:0.083 in; Dimension D:6.630 in; Dimension E:5.56 in; Grease Lubrication - T Seal:2200 rpm;
Komatsu pump 705-95-07031 pump	J:78 mm; Z:46.2 mm; e:15 mm; L:60 mm; B:34 mm; N:10mm; A2:41.5 mm; J1:40 mm; S:17 mm; Recommended tightening torque for set screw:5.5 Nm;
Komatsu pump 705-55-24260 pump	Max operating temperature, Tmax:160 °C; ra max:2 mm; Y2:5.81; Characteristic outer ring frequency, BPF0:17.18 Hz; d2:292 mm; D1:335 mm; B:75 mm; Number of lubrication holes:8; e:0.17; da min:270.2 mm;
Komatsu pump 6737-51-1100CS pump	da min:386 mm; Associated sleeve reference:H3272; Characteristic inner ring frequency, BPFI:10.8 Hz; Brand:NTN; d2:453 mm; D1:551 mm; Fatigue limit load, Cu:530 kN; Characteristic rolling element frequency, BSF:6.94 Hz; Number of lubrication holes:8; Radial clearance class:CN;
Komatsu pump 6211-62-1403 pump	J:78 mm; Z:46.2 mm; e:15 mm; L:60 mm; B:34 mm; N:10mm; A2:41.5 mm; J1:40 mm; S:17 mm; Recommended tightening torque for set screw:5.5 Nm;