Komatsu Hub 714-13-18610 Hub	Grease Type:Standard Grease; Bearing Unit, Type:Square flange shape; Rolling Element Material:Bearing Steel; Stroke:No; d:85; Unit, Type:Insert Bearing Unit; Unit Body Material:Cast Iron;
Komatsu Hub 20Y-27-31220 Hub	Y0:0.9; Characteristic rolling element frequency, BSF:5.65 Hz; Characteristic cage frequency, FTF:0.42 Hz; C:23.81 mm; Nlim (grease):4,900 rpm; Brand:NTN; Characteristic inner ring frequency, BPFI:9.34 Hz; Mass:0.72 kg; Min operating temperature, Tmin:-40 °C; B:29.77 mm;
Komatsu Hub 134-27-61570 Hub	Stroke:No; Bearing Unit, Type:Square flange shape; Fit:J7; Rolling Element Material:Bearing Steel; Bearing Inner Dia. Shape:Tapered hole adapter; Basic Load Rating, Dynamic Rating(N):19500; Accessory:With cast iron cover; Seal:Nitrile; Unit Body Material:Cast Iron;
Komatsu Hub 423-22-12311 Hub	B:30 mm; G:M6x1; Recommended tightening torque for set screw:5.5 Nm; r:0.6; Weight:0.27 kg; D:62 mm; C0:11.2 kN; T max.:100 °C; m:6 mm; C1:5 mm;
Komatsu Hub 195-15-42271 Hub	R - Cone Backface To Clear Radius3:0.500 in; K - Factor8:1.45; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:318000 lbf; Series:328000; Design Units:Imperial; G1 - Heat Generation Factor (Roller-Raceway):5606.6; Cage Type:Pin-Type; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:1230000 lbf; Ab - Cage-Cone Frontface Clearance:0.17 in; a - Effective Center Location4:-0.32 in;
Komatsu Hub 175-10-21170 Hub	A:70 mm; B1:65 mm; Dz:132 mm; Designation of open end cover:SCO213-60; T max.:100 °C; d:60 mm; A1:26 mm; N2:70 mm; Adapter sleeve reference:H2313; d1:85 mm;
Komatsu Hub 144-27-11310 Hub	S:24.6 mm; C0:23.2 kN; Recommended tightening torque for set screw:11.5 Nm; B:49.2 mm; C:35.1 kN; d1:67.2 mm; B1:62.7 mm; s1:42.9 mm; L1:90 mm; H1:102 mm;
Komatsu Hub 195-21-12174 Hub	L:60 mm; Designation of closed end cover:SCC203; Dz:46 mm; S:6 mm; Recommended tightening torque for set screw:3.2 Nm; N:10mm; e:15 mm; T max.:100 °C; C:9.55 kN; A:25.5 mm;