Komatsu Shield 114-03-51330 Shield | Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; C Chamfered:Not Provided; Height H(mm):50 ~ 100; Holder Surface Treatment:Electroless Nickel P; Bearing Part Number:6008; Lateral Width L(mm):122; Type:Bearings with Housin; Number of Bearings:Single; |
Komatsu Shield 361-03-21120 Shield | Bore Size d:140 mm; Oil Reference Speed:4900 rpm; Outside Diameter D:250.000 mm; Cr - Dynamic Load Rating:166 kN; Clearance:C0 (Normal); C0r - Static Load Rating:150 kN; Weight:7.45 Kg; Outside Ring Width B:42.000 mm; Radius Rs min:3.000 mm; Grease Reference Speed:3400 rpm; |
Komatsu Shield X212196480ST Shield | Dimension H:1.50 in; Oil Lubrication - B/C/O Seal:350 rpm; C0 - Static Load:237000 lb; Grease Lubrication - T Seal:900 rpm; Eng Internal Radial Clearance - Max:0.0079; Dimension E:7.000 in; Full Timken Part Number:99999B; Grease Lubrication - M/N Seal:650 rpm; C - Dynamic Load (Basic):194000 lb; Shaft Size :5 in; |
Komatsu Shield 205-979-7560 Shield | k:7.5 mm; Y2:2.75; Characteristic inner ring frequency, BPFI:12.83 Hz; Max operating temperature, Tmax:200 °C; Nref:590 rpm; Da max:440 mm; Brand:SNR; Characteristic cage frequency, FTF:0.44 Hz; Mass:121 kg; Fatigue limit load, Cu:266 kN; |
Komatsu Shield 201-54-75105 Shield | Weight:2.19 kg; C:31.85 kN; L1:54.5 mm; A:48 mm; Recommended tightening torque for set screw:11.5 Nm; B1:43.7 mm; T max.:200 °C; Designation of bearing:ES209G2T20; J:150 mm; d1:62 mm; |
Komatsu Shield 419-03-21340 Shield | Bore Size d:140 mm; Oil Reference Speed:4900 rpm; Outside Diameter D:250.000 mm; Cr - Dynamic Load Rating:166 kN; Clearance:C0 (Normal); C0r - Static Load Rating:150 kN; Weight:7.45 Kg; Outside Ring Width B:42.000 mm; Radius Rs min:3.000 mm; Grease Reference Speed:3400 rpm; |
Komatsu Shield 145-Z79-5340 Shield | Bore Size d:140 mm; Oil Reference Speed:4900 rpm; Outside Diameter D:250.000 mm; Cr - Dynamic Load Rating:166 kN; Clearance:C0 (Normal); C0r - Static Load Rating:150 kN; Weight:7.45 Kg; Outside Ring Width B:42.000 mm; Radius Rs min:3.000 mm; Grease Reference Speed:3400 rpm; |
Komatsu Shield 428-03-11282 Shield | Max operating temperature, Tmax:120 °C; k:4 mm; B:45 mm; Characteristic inner ring frequency, BPFI:9.2 Hz; rs min:3 mm; Number of lubrication holes:4; ra max:2.5 mm; Manufacturer Name:NTN; Static load, C0:420 kN; D:200 mm; |