Komatsu cover TZ266B1008-00 cover	Pre Install Clearance Max:0.0047 in; Float:0.083 in; Dimension C:4.19 in; Dimension A:0.594 in; Engineering Group:Mounted Bearing; Full Timken Part Number:QVVMC17V070SB; Y1 - Geometry Factor:3.07; Dimension SVV:4.18 in; Dimension F:6.750 in; C0 - Static Load:71900 lb;
Komatsu cover 21N-30-37421 cover	Cone Part Number:HM535347; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:256000 lbf; Aa - Cage-Cone Backface Clearance:0.21 in; R - Cone Backface To Clear Radius3:0.14 in; C1 - Dynamic Radial Rating (1 million revolutions)6:147000 lbf; Cage Type:Stamped Steel; da - Cone Frontface Backing Diameter:7.4 in; Ab - Cage-Cone Frontface Clearance:0.13 in; db - Cone Backface Backing Diameter:7.56 in;
Komatsu cover 195-50-22140 cover	Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Clear Anodize; Number of Bearings:Single; Shape:T-Shaped; RoHS:6; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Width T(mm):19;
Komatsu cover 561-15-55863 cover	Shape:Flanged Pilot Type; Flange Shape:Round Type; Volume Discount:Available; Bearing Part Number:6000; Type:Bearings with Housin; Seals:DD (Contact Rubber S; Flange O.D. H(φ):50; Number of Bearings:Single;
Komatsu cover 208-54-71612ST cover	D:160 mm; Brand:NTN; Max operating temperature, Tmax:120 °C; Static load, C0:30 kN; Nlim (grease):3,800 rpm; Radial clearance class:C3; B:37 mm; Mass:3.65 kg; Y1:2.8; Y0:2.9;
Komatsu cover 07178-07042 cover	Bearing - Housing - Seal:LSM190BRH; Dimension V:0.1 in; Dimension L:7.7 in; Shaft Size:190 mm; Maximum Speed:1070 rpm; Dimension N:15.750 in; Cr - Dynamic Load Rating:138033 lbf; Note:This product line wa; Seal Type:Felt Seal; Bolt Size:4 x M24;
Komatsu cover 17A-49-12141 cover	Bearing - Housing - Seal:LSM190BRH; Dimension V:0.1 in; Dimension L:7.7 in; Shaft Size:190 mm; Maximum Speed:1070 rpm; Dimension N:15.750 in; Cr - Dynamic Load Rating:138033 lbf; Note:This product line wa; Seal Type:Felt Seal; Bolt Size:4 x M24;
Komatsu cover 17A-Z11-2830 cover	D:160 mm; Brand:NTN; Max operating temperature, Tmax:120 °C; Static load, C0:30 kN; Nlim (grease):3,800 rpm; Radial clearance class:C3; B:37 mm; Mass:3.65 kg; Y1:2.8; Y0:2.9;