Komatsu cover 20Y-53-12154KN cover	Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Clear Anodize; Number of Bearings:Single; Shape:T-Shaped; RoHS:6; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Width T(mm):19;
Komatsu cover 207-54-71342 cover	Housing Width:7.9 in; Dimension H:7.520 in; Bearing Type:Split Cylindrical Ex; Bolt Size:4 x M24; Support Type:Four-Bolt Plummer Bl; Series Type:Heavy Series; Cr - Dynamic Load Rating:146800 lbf; Dimension H1:1.5 in; Dimension J:17.2 in; Dimension H2:15.9 in;
Komatsu cover 6240-11-8960 cover	Shape:Flanged Pilot Type; Flange Shape:Round Type; Volume Discount:Available; Bearing Part Number:6000; Type:Bearings with Housin; Seals:DD (Contact Rubber S; Flange O.D. H(φ):50; Number of Bearings:Single;
Komatsu cover 561-40-61141 cover	D:160 mm; Brand:NTN; Max operating temperature, Tmax:120 °C; Static load, C0:30 kN; Nlim (grease):3,800 rpm; Radial clearance class:C3; B:37 mm; Mass:3.65 kg; Y1:2.8; Y0:2.9;
Komatsu cover 20Y-54-61931 cover	G2 - Heat Generation Factor (Rib-Roller End):16.9; da - Cone Frontface Backing Diameter:2.6 in; K - Factor8:1.76; d:2.2500 in; Cage Type:Stamped Steel; B - Cone Width:1.2188 in; Cone Part Number:45290; Aa - Cage-Cone Backface Clearance:0.07 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:60000 lbf; a - Effective Center Location4:-0.32 in;
Komatsu cover 21M-26-11161 cover	Pre Install Clearance Max:0.0047 in; Float:0.083 in; Dimension C:4.19 in; Dimension A:0.594 in; Engineering Group:Mounted Bearing; Full Timken Part Number:QVVMC17V070SB; Y1 - Geometry Factor:3.07; Dimension SVV:4.18 in; Dimension F:6.750 in; C0 - Static Load:71900 lb;
Komatsu cover 20Y-53-11752 cover	Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Clear Anodize; Number of Bearings:Single; Shape:T-Shaped; RoHS:6; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Width T(mm):19;
Komatsu cover 20Y-54-61551 cover	Grease Type:SH33M; Surface Treatment:No; RoHS:6; Diameter series symbol:Used for Light load; Fit:J7; Unit, Type:Insert Bearing Unit; Unit Body Material:Cast Iron; Rolling Element Material:Bearing Steel;