Komatsu bushing 205-63-55271 bushing | H:33.3 mm; B:31 mm; A1:20 mm; Designation of closed end cover:SCC204; H1:14 mm; Recommended tightening torque for set screw:5.5 Nm; G:M6x1; C0:6.65 kN; L1:21 mm; Dz:54 mm; |
Komatsu bushing 17M-61-21140 bushing | Seal Type:Standard; Grease Type:Standard Grease; Surface Treatment:No; Basic Load Rating Cor(KN):104.7; Shaft Dia. (mm)(φ):100; Flange dimensions L(mm):268; Basic Load Rating Cr(KN):134; RoHS:6; Basic Load Rating, Static Rating(N):105000; Rolling Element Material:Steel; |
Komatsu bushing 707-76-90110 bushing | Number of Bearings:Single; RoHS:6; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Days to Ship:8 Days; Shape:Front Mount; |
Komatsu bushing 198-50-51131 bushing | B:42.8 mm; T max.:100 °C; N1:23 mm; Z:84.2 mm; L1:60 mm; G:M6x1; J:146 mm; T min.:-20 °C; A1:37 mm; L:190 mm; |
Komatsu bushing 144-13-12140 bushing | Combination of Angular Contact Ball Bearings:Back Combination; Contact angle symbol:A; D:110; Inner/Outer Ring Material:Steel; Retainer Type:Momi removing; Outer Ring Shape:Flat; Max. Allowed rpm(rpm):5600; Size Standards:Metric System; Combination symbol:DB; |
Komatsu bushing 17M-50-22210 bushing | H:33.3 mm; B:31 mm; A1:20 mm; Designation of closed end cover:SCC204; H1:14 mm; Recommended tightening torque for set screw:5.5 Nm; G:M6x1; C0:6.65 kN; L1:21 mm; Dz:54 mm; |
Komatsu bushing 207-70-51430 bushing | Height H(mm):30 ~ 50; Shape:T-Shaped; Seals:DD (Contact Rubber S; Thickness T(mm):25 ~ 50; Bearing Retained:No; C Chamfered:Not Provided; Lateral Width L(mm):60; Bearing Part Number:6902; Bearing I.D. d(mm):15; Days to Ship:8 Days; |
Komatsu bushing 3EH-72-15271KF bushing | B - Cone Width:1.0594 in; Ab - Cage-Cone Frontface Clearance:0.16 in; Cup Part Number:55444D; K - Factor7:0.66; d:1.9680 in; Cone Part Number:55194; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:9380 lbf; Bearing Weight:6.06 lb; Da - Cup Frontface Backing Diameter:4.15 in; Y2 - ISO Factor10:1.14; |