Komatsu bushing 19M-72-21383 bushing	H2:72 mm; L1:27 mm; B:27 mm; d:25.4 mm; Dz:60 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of open end cover:SCOU205-16; L:84 mm; A1:23 mm; C0:7.88 kN;
Komatsu bushing 22L-46-11311 bushing	B - Cone Width:1.0594 in; Ab - Cage-Cone Frontface Clearance:0.16 in; Cup Part Number:55444D; K - Factor7:0.66; d:1.9680 in; Cone Part Number:55194; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:9380 lbf; Bearing Weight:6.06 lb; Da - Cup Frontface Backing Diameter:4.15 in; Y2 - ISO Factor10:1.14;
Komatsu bushing 20N-46-81140 bushing	H2:41 mm; C:25.7 kN; C0:15.2 kN; B:42.9 mm; S:17.5 mm; A5:25.4 mm; L1:225 mm; A:21 mm; s1:21.45 mm; SW:3.97 mm;
Komatsu bushing 07440-66371 bushing	Combination of Angular Contact Ball Bearings:Back Combination; Contact angle symbol:A; D:110; Inner/Outer Ring Material:Steel; Retainer Type:Momi removing; Outer Ring Shape:Flat; Max. Allowed rpm(rpm):5600; Size Standards:Metric System; Combination symbol:DB;
Komatsu bushing 17A-22-14161 bushing	H:33.3 mm; B:31 mm; A1:20 mm; Designation of closed end cover:SCC204; H1:14 mm; Recommended tightening torque for set screw:5.5 Nm; G:M6x1; C0:6.65 kN; L1:21 mm; Dz:54 mm;
Komatsu bushing 07143-11107 bushing	Seal Type:Standard; Grease Type:Standard Grease; Surface Treatment:No; Basic Load Rating Cor(KN):104.7; Shaft Dia. (mm)(φ):100; Flange dimensions L(mm):268; Basic Load Rating Cr(KN):134; RoHS:6; Basic Load Rating, Static Rating(N):105000; Rolling Element Material:Steel;
Komatsu bushing 707-76-90411 bushing	Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; Volume Discount:Available; Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea; Width T(mm):50; Type:Bearings with Housin; Number of Bearings:Double; Shape:Flange Type;
Komatsu bushing 205-63-55271 bushing	H:33.3 mm; B:31 mm; A1:20 mm; Designation of closed end cover:SCC204; H1:14 mm; Recommended tightening torque for set screw:5.5 Nm; G:M6x1; C0:6.65 kN; L1:21 mm; Dz:54 mm;