Komatsu bushing 198-50-43190 bushing	Seal Type:Standard; Grease Type:Standard Grease; Surface Treatment:No; Basic Load Rating Cor(KN):104.7; Shaft Dia. (mm)(φ):100; Flange dimensions L(mm):268; Basic Load Rating Cr(KN):134; RoHS:6; Basic Load Rating, Static Rating(N):105000; Rolling Element Material:Steel;
Komatsu bushing 142-70-11352 bushing	Combination of Angular Contact Ball Bearings:Back Combination; Contact angle symbol:A; D:110; Inner/Outer Ring Material:Steel; Retainer Type:Momi removing; Outer Ring Shape:Flat; Max. Allowed rpm(rpm):5600; Size Standards:Metric System; Combination symbol:DB;
Komatsu bushing 208-70-72541 bushing	B:42.8 mm; T max.:100 °C; N1:23 mm; Z:84.2 mm; L1:60 mm; G:M6x1; J:146 mm; T min.:-20 °C; A1:37 mm; L:190 mm;
Komatsu bushing TN02214-40400 bushing	B - Cone Width:1.0594 in; Ab - Cage-Cone Frontface Clearance:0.16 in; Cup Part Number:55444D; K - Factor7:0.66; d:1.9680 in; Cone Part Number:55194; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:9380 lbf; Bearing Weight:6.06 lb; Da - Cup Frontface Backing Diameter:4.15 in; Y2 - ISO Factor10:1.14;
Komatsu bushing 195-50-41180 bushing	Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; Volume Discount:Available; Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea; Width T(mm):50; Type:Bearings with Housin; Number of Bearings:Double; Shape:Flange Type;
Komatsu bushing 21T-70-71222 bushing	Combination of Angular Contact Ball Bearings:Back Combination; Contact angle symbol:A; D:110; Inner/Outer Ring Material:Steel; Retainer Type:Momi removing; Outer Ring Shape:Flat; Max. Allowed rpm(rpm):5600; Size Standards:Metric System; Combination symbol:DB;
Komatsu bushing 21N-72-14180 bushing	Characteristic rolling element frequency, BSF:5.79 Hz; r1s min:1.1 mm; dc min:61 mm; D:85 mm; Characteristic cage frequency, FTF:0.42 Hz; Radial clearance class:CN; d:45 mm; E:76.5 mm; Characteristic inner ring frequency, BPFI:8.76 Hz; d1:58.9 mm;
Komatsu bushing 425-S95-1290 bushing	B:27 mm; Designation of housing:T205-; N1:16 mm; L:97 mm; H2:51 mm; Designation of bearing:US205-16G2T20; A1:12 mm; G:M6x1; A2:24 mm; Recommended tightening torque for set screw:3.7 Nm;