Komatsu bushing 569-50-6B221 bushing	B - Cone Width:1.0594 in; Ab - Cage-Cone Frontface Clearance:0.16 in; Cup Part Number:55444D; K - Factor7:0.66; d:1.9680 in; Cone Part Number:55194; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:9380 lbf; Bearing Weight:6.06 lb; Da - Cup Frontface Backing Diameter:4.15 in; Y2 - ISO Factor10:1.14;
Komatsu bushing 135-63-32520 bushing	Height H(mm):30 ～ 50; Shape:T-Shaped; Seals:DD (Contact Rubber S; Thickness T(mm):25 ～ 50; Bearing Retained:No; C Chamfered:Not Provided; Lateral Width L(mm):60; Bearing Part Number:6902; Bearing I.D. d(mm):15; Days to Ship:8 Days;
Komatsu bushing 17M-50-41161 bushing	H2:41 mm; C:25.7 kN; C0:15.2 kN; B:42.9 mm; S:17.5 mm; A5:25.4 mm; L1:225 mm; A:21 mm; s1:21.45 mm; SW:3.97 mm;
Komatsu bushing TN02214-40400 bushing	Housing Style:Four-Bolt Square Fla; Dimension E:5.56 in; Dimension RAA:0.97 in; Locking Style:Double Concentric; Eng Internal Radial Clearance - Min:0.0020; Grease Lubrication - B/C/O Seal:1300 rpm; Weight:23 lb; Dimension C:4.50 in; Bearing Number:22215; Float:0.083 in;
Komatsu bushing 427-46-11920 bushing	Characteristic rolling element frequency, BSF:5.79 Hz; r1s min:1.1 mm; dc min:61 mm; D:85 mm; Characteristic cage frequency, FTF:0.42 Hz; Radial clearance class:CN; d:45 mm; E:76.5 mm; Characteristic inner ring frequency, BPFI:8.76 Hz; d1:58.9 mm;
Komatsu bushing 707-76-55531 bushing	Combination of Angular Contact Ball Bearings:Back Combination; Contact angle symbol:A; D:110; Inner/Outer Ring Material:Steel; Retainer Type:Momi removing; Outer Ring Shape:Flat; Max. Allowed rpm(rpm):5600; Size Standards:Metric System; Combination symbol:DB;
Komatsu bushing 134-50-61150 bushing	Characteristic rolling element frequency, BSF:5.79 Hz; r1s min:1.1 mm; dc min:61 mm; D:85 mm; Characteristic cage frequency, FTF:0.42 Hz; Radial clearance class:CN; d:45 mm; E:76.5 mm; Characteristic inner ring frequency, BPFI:8.76 Hz; d1:58.9 mm;
Komatsu bushing 21T-30-73140 bushing	H:33.3 mm; B:31 mm; A1:20 mm; Designation of closed end cover:SCC204; H1:14 mm; Recommended tightening torque for set screw:5.5 Nm; G:M6x1; C0:6.65 kN; L1:21 mm; Dz:54 mm;