Komatsu bushing 262-70-21150 bushing	Combination of Angular Contact Ball Bearings:Back Combination; Contact angle symbol:A; D:110; Inner/Outer Ring Material:Steel; Retainer Type:Momi removing; Outer Ring Shape:Flat; Max. Allowed rpm(rpm):5600; Size Standards:Metric System; Combination symbol:DB;
Komatsu bushing 175-27-31441 bushing	B:27 mm; Designation of housing:T205-; N1:16 mm; L:97 mm; H2:51 mm; Designation of bearing:US205-16G2T20; A1:12 mm; G:M6x1; A2:24 mm; Recommended tightening torque for set screw:3.7 Nm;
Komatsu bushing 46D-010-3340KF bushing	B - Cone Width:1.0594 in; Ab - Cage-Cone Frontface Clearance:0.16 in; Cup Part Number:55444D; K - Factor7:0.66; d:1.9680 in; Cone Part Number:55194; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:9380 lbf; Bearing Weight:6.06 lb; Da - Cup Frontface Backing Diameter:4.15 in; Y2 - ISO Factor10:1.14;
Komatsu bushing 707-76-65140 bushing	Seal Type:Standard; Grease Type:Standard Grease; Surface Treatment:No; Basic Load Rating Cor(KN):104.7; Shaft Dia. (mm)(φ):100; Flange dimensions L(mm):268; Basic Load Rating Cr(KN):134; RoHS:6; Basic Load Rating, Static Rating(N):105000; Rolling Element Material:Steel;
Komatsu bushing KY15907-50020 bushing	Housing Width:3.3 in; Weight:16 lb; Series Type:Light Series; Ca - Axial Load Rating:719.38 lbf; Dimension H1:0.9 in; Bearing Type:Split Cylindrical Re; Maximum Speed:5400 rpm; Dimension M:2.4 in; Seal Type:Felt Type; Dimension H:2.362 in;
Komatsu bushing 707-76-55531 bushing	Combination of Angular Contact Ball Bearings:Back Combination; Contact angle symbol:A; D:110; Inner/Outer Ring Material:Steel; Retainer Type:Momi removing; Outer Ring Shape:Flat; Max. Allowed rpm(rpm):5600; Size Standards:Metric System; Combination symbol:DB;
Komatsu bushing 141-923-1170 bushing	Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; Volume Discount:Available; Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea; Width T(mm):50; Type:Bearings with Housin; Number of Bearings:Double; Shape:Flange Type;
Komatsu bushing 569-52-41920 bushing	H2:72 mm; L1:27 mm; B:27 mm; d:25.4 mm; Dz:60 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of open end cover:SCOU205-16; L:84 mm; A1:23 mm; C0:7.88 kN;