Komatsu bushing 207-70-51190 bushing	Housing Width:3.3 in; Weight:16 lb; Series Type:Light Series; Ca - Axial Load Rating:719.38 lbf; Dimension H1:0.9 in; Bearing Type:Split Cylindrical Re; Maximum Speed:5400 rpm; Dimension M:2.4 in; Seal Type:Felt Type; Dimension H:2.362 in;
Komatsu bushing 415-46-11320 bushing	H2:72 mm; L1:27 mm; B:27 mm; d:25.4 mm; Dz:60 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of open end cover:SCOU205-16; L:84 mm; A1:23 mm; C0:7.88 kN;
Komatsu bushing 208-70-K2230 bushing	B - Cone Width:1.0594 in; Ab - Cage-Cone Frontface Clearance:0.16 in; Cup Part Number:55444D; K - Factor7:0.66; d:1.9680 in; Cone Part Number:55194; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:9380 lbf; Bearing Weight:6.06 lb; Da - Cup Frontface Backing Diameter:4.15 in; Y2 - ISO Factor10:1.14;
Komatsu bushing 141-923-1170 bushing	Housing Style:Four-Bolt Square Fla; Dimension E:5.56 in; Dimension RAA:0.97 in; Locking Style:Double Concentric; Eng Internal Radial Clearance - Min:0.0020; Grease Lubrication - B/C/O Seal:1300 rpm; Weight:23 lb; Dimension C:4.50 in; Bearing Number:22215; Float:0.083 in;
Komatsu bushing 581-50-11280 bushing	Seal Type:Standard; Grease Type:Standard Grease; Surface Treatment:No; Basic Load Rating Cor(KN):104.7; Shaft Dia. (mm)(φ):100; Flange dimensions L(mm):268; Basic Load Rating Cr(KN):134; RoHS:6; Basic Load Rating, Static Rating(N):105000; Rolling Element Material:Steel;
Komatsu bushing 381-876358-1 bushing	H2:72 mm; L1:27 mm; B:27 mm; d:25.4 mm; Dz:60 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of open end cover:SCOU205-16; L:84 mm; A1:23 mm; C0:7.88 kN;
Komatsu bushing 707-76-55531 bushing	Combination of Angular Contact Ball Bearings:Back Combination; Contact angle symbol:A; D:110; Inner/Outer Ring Material:Steel; Retainer Type:Momi removing; Outer Ring Shape:Flat; Max. Allowed rpm(rpm):5600; Size Standards:Metric System; Combination symbol:DB;
Komatsu bushing 235-45-33551 bushing	Characteristic rolling element frequency, BSF:5.79 Hz; r1s min:1.1 mm; dc min:61 mm; D:85 mm; Characteristic cage frequency, FTF:0.42 Hz; Radial clearance class:CN; d:45 mm; E:76.5 mm; Characteristic inner ring frequency, BPFI:8.76 Hz; d1:58.9 mm;