Komatsu LOCK 561-54-84151 LOCK 426-56-31941 LOCK	ra max:1 mm; Category:Precision Ball Beari; Fatigue limit load, Cu:0.51 kN; Enclosure Type:Contact Seal; Characteristic inner ring frequency, BPFI:5.42 Hz; Harmonized Tariff Code:8482.10.50.68; rs min:1 mm; Preload:None; Enclosure:1 Seal; Contact Angle:0 Degree;
Komatsu LOCK 23C-953-8410 LOCK 23B-950-5130 LOCK	T max.:200 °C; d:60.32 mm; H:69.8 mm; N:M16; T min.:-20 °C; G:M6x1; L:150 mm; C:52.5 kN; A1:40 mm; Designation of open end cover:SCOU212-38;
Komatsu LOCK 20Y-54-84970 LOCK 569-54-8A580 LOCK	N:14mm; B:42.9 mm; Designation of bearing:UC207-21G2; G:M6x1; s1:21.45 mm; T min.:-20 °C; A:34 mm; d:33.34 mm; e:19 mm; Weight:1.51 kg;
Komatsu LOCK 19M-61-29160 LOCK 14X-54-54310 LOCK	T max.:200 °C; d:60.32 mm; H:69.8 mm; N:M16; T min.:-20 °C; G:M6x1; L:150 mm; C:52.5 kN; A1:40 mm; Designation of open end cover:SCOU212-38;
Komatsu LOCK 426-56-32110 LOCK 09460-00008 LOCK	r - Cup Backface To Clear Radius1:0.06 in; Design Units:Imperial; Cg - Geometry Factor:0.17; Db - Cup Backface Backing Diameter:6.93 in; e - ISO Factor2:0.36; Cup Part Number:LM328410; Series:LM328400; D:7.3750 in; Da - Cup Frontface Backing Diameter:7.20 in; C - Cup Width:0.9063 in;
Komatsu LOCK 09460-00005 LOCK 568-30-11541AK LOCKING	Y1 - ISO Factor5:2.83; Da - Outer Ring Backing Diameter:824.000 mm; e - ISO Factor3:0.36; Y2 - ISO Factor6:1.86; Cg - Geometry Factor8:0.11; r - Outer Ring To Clear Radius2:6.000 mm; C0 - Static Radial Rating:17900000 N; d:500.000 mm; B - Inner Ring Width:336 mm; R - Inner Ring To Clear Radius1:6.000 mm;
Komatsu LOCK 426-56-31421 LOCK 113-27-21220 LOCK	Bearing Material:[Steel] Steel; Days to Ship:7 Days; RoHS:6; Type:Bearings with Housin; Holder Surface Treatment:Electroless Nickel P; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Number of Bearings:Double;
Komatsu LOCK 195-71-37290 LOCK YNGN651000KF LOCK	Bearing Retained:No; Type:Bearings with Housin; Volume Discount:Available; RoHS:6; Bearing Part Number:6904; Days to Ship:7 Days; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Clear Anodize;