Komatsu LOCK 195-Z11-1430 LOCK 144-Y11-2760 LOCK	Y1 - ISO Factor5:2.83; Da - Outer Ring Backing Diameter:824.000 mm; e - ISO Factor3:0.36; Y2 - ISO Factor6:1.86; Cg - Geometry Factor8:0.11; r - Outer Ring To Clear Radius2:6.000 mm; C0 - Static Radial Rating:17900000 N; d:500.000 mm; B - Inner Ring Width:336 mm; R - Inner Ring To Clear Radius1:6.000 mm;
Komatsu LOCK 425-S33-3490 LOCK 19M-61-29171 LOCK	Bearing Retained:No; Type:Bearings with Housin; Volume Discount:Available; RoHS:6; Bearing Part Number:6904; Days to Ship:7 Days; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Clear Anodize;
Komatsu LOCK 426-56-31422 LOCK 425-S33-3490 LOCK	ra max:1 mm; Category:Precision Ball Beari; Fatigue limit load, Cu:0.51 kN; Enclosure Type:Contact Seal; Characteristic inner ring frequency, BPFI:5.42 Hz; Harmonized Tariff Code:8482.10.50.68; rs min:1 mm; Preload:None; Enclosure:1 Seal; Contact Angle:0 Degree;
Komatsu LOCK 195-979-1491 LOCK 423-925-3840 LOCK	Number of Raceway Ring Rows:Single Row; Load Direction:Radial; RoHS:6; Spacer, Sleeve symbol:No; Acoustic Symbol:No; Days to Ship:6 Days or more; Internal Symbol:No; Special Configurations Code:No; Holder Symbol:No;
Komatsu LOCK 423-925-3840 LOCK 22U-54-11161 LOCK	Bearing Retained:No; Type:Bearings with Housin; Volume Discount:Available; RoHS:6; Bearing Part Number:6904; Days to Ship:7 Days; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Clear Anodize;
Komatsu LOCK 23D-950-4311 LOCK ASS'Y 56B-54-31640 LOCK ASS'Y	C0:29.2 kN; S:27.7 mm; C:43.55 kN; T max.:200 °C; Z:76.2 mm; Weight:4.23 kg; J:150 mm; d1:74.5 mm; d:55 mm; T min.:-20 °C;
Komatsu LOCK 42A-56-53630 LOCK ASS'Y 09256-11819 LOCK	ra max:1 mm; Category:Precision Ball Beari; Fatigue limit load, Cu:0.51 kN; Enclosure Type:Contact Seal; Characteristic inner ring frequency, BPFI:5.42 Hz; Harmonized Tariff Code:8482.10.50.68; rs min:1 mm; Preload:None; Enclosure:1 Seal; Contact Angle:0 Degree;
Komatsu LOCK 23A-952-1812 LOCK 09460-00009 LOCK	B:34 mm; A:18 mm; C:12.8 kN; Designation of housing:FCE204-; d1:32.4 mm; A2:28.5 mm; Recommended tightening torque for set screw:5.5 Nm; S:17 mm; H3:62; s1:30.5 mm;