Komatsu LOCK 21D-54-14830 LOCK 426-925-3182 LOCK	RoHS:6; Flange Shape:Compact Type; Type:Bearings with Housin; Shape:Flange Type; Flange O.D. H(φ):52; Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S; Days to Ship:7 Days; Volume Discount:Available;
Komatsu LOCK YNGN651000KF LOCK 425-S14-4370 LOCK	N:14mm; B:42.9 mm; Designation of bearing:UC207-21G2; G:M6x1; s1:21.45 mm; T min.:-20 °C; A:34 mm; d:33.34 mm; e:19 mm; Weight:1.51 kg;
Komatsu LOCK 561-54-84151 LOCK 426-56-31941 LOCK	ra max:1 mm; Category:Precision Ball Beari; Fatigue limit load, Cu:0.51 kN; Enclosure Type:Contact Seal; Characteristic inner ring frequency, BPFI:5.42 Hz; Harmonized Tariff Code:8482.10.50.68; rs min:1 mm; Preload:None; Enclosure:1 Seal; Contact Angle:0 Degree;
Komatsu LOCK 154-979-3461 LOCK 195-71-21230 LOCK	B:34 mm; A:18 mm; C:12.8 kN; Designation of housing:FCE204-; d1:32.4 mm; A2:28.5 mm; Recommended tightening torque for set screw:5.5 Nm; S:17 mm; H3:62; s1:30.5 mm;
Komatsu LOCK 22M-60-31500 LOCK ASS'Y PZYK50-53750 LOCK	Max operating temperature, Tmax:120 °C; Characteristic outer ring frequency, BPF0:7.15 Hz; Mass:0.18 kg; B:10 mm; Characteristic cage frequency, FTF:0.45 Hz; d:50 mm; Min operating temperature, Tmin:-40 °C; Brand:SNR; Dynamic load, C:15.5 kN; Da max:76 mm;
Komatsu LOCK 417-926-3141 LOCK 20Y-54-75900 LOCK ASS'Y	B:34 mm; A:18 mm; C:12.8 kN; Designation of housing:FCE204-; d1:32.4 mm; A2:28.5 mm; Recommended tightening torque for set screw:5.5 Nm; S:17 mm; H3:62; s1:30.5 mm;
Komatsu LOCK 421-54-H1A20 LOCK 427-S33-1380 LOCK	Y1 - ISO Factor5:2.83; Da - Outer Ring Backing Diameter:824.000 mm; e - ISO Factor3:0.36; Y2 - ISO Factor6:1.86; Cg - Geometry Factor8:0.11; r - Outer Ring To Clear Radius2:6.000 mm; C0 - Static Radial Rating:17900000 N; d:500.000 mm; B - Inner Ring Width:336 mm; R - Inner Ring To Clear Radius1:6.000 mm;
Komatsu LOCK 09460-00008 LOCK 14X-54-74860 LOCK	Bearing Retained:No; Type:Bearings with Housin; Volume Discount:Available; RoHS:6; Bearing Part Number:6904; Days to Ship:7 Days; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Clear Anodize;